Description
This is Dewey's Copper Eliminator rod sized for .27 caliber and up, a 36-inch one-piece rod that covers everything from 6.8mm and .270 on through .308, 7.62×39, .303 British and the rest of the common centerfire rifle crowd. If you've trusted Dewey rods before, this is the same ball-bearing handle and bonded nylon coating you already know, but with a twist aimed at folks who chase copper fouling.
What Sets the Copper Eliminator Apart
The big difference here is the hardware. Instead of brass, the jag, threaded ferrule and tip are machined from aluminum. Brass can react with ammonia-based bore solvents and leave a blue-green tint on your patch, which can fool you into thinking there's still copper in the bore when there isn't. The aluminum components skip that problem, so the color you see on the patch is telling you the truth about your barrel. Aluminum is close to brass in hardness, so it holds up without being aggressive on the bore or crown.
Built Around the Dewey .27 & Up Rod
The rod itself is coated in Dewey's permanently bonded nylon, which won't peel, flake or pick up grit the way cheaper vinyl coatings can. That coating is what protects the rifling in a quality match barrel over years of cleaning sessions. The handle rides on front and rear ball bearings so it spins freely, letting the rod turn with the rifling instead of fighting it as you push a patch or brush down the pipe.
Threading and Accessories for the 30CA-36
This rod uses an 8/32 female thread and comes with a Copper Eliminator aluminum jag so you can start running patches right out of the package. The 8/32 setup opens it up to the wide range of Dewey brushes, jags and bore mops in that thread pattern. At 36 inches, it's a proper full-length rifle rod that pushes all the way through a long barrel in a single stroke, which is exactly how you want to clean to avoid dragging crud back and forth.
Key Specifications
- Manufacturer: Dewey
- Model / MPN: 30CA-36
- UPC: 608060000383
- Series: Copper Eliminator
- Caliber Range: .27 Caliber & Up
- Length: 36 Inches
- Rod Construction: One-Piece, Nylon Coated
- Coating O.D.: .260 / .265
- Hardware Material: Aluminum
- Thread: 8/32 Female
- Handle: Ball-Bearing Spinning Handle
- Style: Rifle
What’s Included
- Dewey Copper Eliminator .27 caliber & up cleaning rod (36 inch)
- Copper Eliminator aluminum jag (30JMA)
Frequently Asked Questions
What calibers does the Dewey .27 & up Copper Eliminator rod work with?
It's built for .27 caliber and larger, which covers the bulk of common centerfire rifles like .270, 6.8mm, 7mm/.284, .308/.30 cal, 7.62×39 and .303 British. The caliber-specific part is really the jag and any brush you thread on, so as long as your bore is .27 or bigger, this rod is a fit.
How is the Copper Eliminator rod different from the standard Dewey nylon coated rod?
The rod and nylon coating are the same proven Dewey design, but the hardware is machined from aluminum instead of brass. Brass can react with ammonia-based copper solvents and leave a blue-green color on your patch, which can read like leftover copper fouling even when the bore is clean. Aluminum doesn't do that, so your patch gives you an accurate picture of how clean the barrel really is.
What thread does the 30CA-36 use and does it come with anything?
This rod has an 8/32 female thread and ships with a Copper Eliminator aluminum jag so you can load a patch and get to work right away. The 8/32 pattern lets you add Dewey brushes, mops and other accessories in that same thread.
Will the nylon coating protect my barrel's rifling?
That's the whole idea behind it. Dewey's nylon coating is permanently bonded so it won't peel or pick up abrasive grit, which keeps the rod from scoring the rifling or the crown. Paired with the free-spinning ball-bearing handle that follows the rifling, it's a setup trusted by match and precision folks for protecting good barrels.




Reviews
There are no reviews yet.