0
0

Hornady 260 Remington Match Grade Full Length Bushing Sizing Die

UPC: 090255462142

$61.99

3 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Hornady 260 Remington Match Grade Full Length Die is built for the handloader who treats brass prep like a precision craft. This is a bushing-style full length sizing die, which means it sizes the whole case body for reliable chambering while giving you control over the neck through an interchangeable bushing system. If you shoot the 260 Rem in a bolt gun and care about consistency round to round, this is the kind of tool that earns its spot on the bench.

What Sets the 260 Rem Match Grade Die Apart

The heart of this die is the self-centering neck sizing bushing setup. Instead of a fixed neck diameter, you pick the bushing that matches your brass and the neck tension you want. That keeps you from oversizing the neck and then expanding it back out, which is what wears brass down and shortens case life. The bushings drop in self-centered and are available in .001 inch increments, so you can fine tune tension to your load. Worth knowing up front: the bushing is sold separately and is not included with the die, so you'll want to grab the correct .264 caliber bushing to complete the setup.

Inside the 260 Remington Full Length Sizing Die

Hornady built this one around a free-floating spindle, which keeps neck expansion concentric and bullets sitting straighter in the case. A knurled spindle lock makes adjustments quick, and an O-ring tensioner holds your setting put during a resizing session. It ships with an elliptical expander polished to cut down friction and reduce case neck stretch, plus a replaceable decap pin retainer so you're not sidelined if you bend a pin. The die uses the standard 7/8-14 threads, so it drops into any common reloading press.

Getting the Most From This Die

The 260 Remington has long been a favorite among precision and long range crowds, and dies like this are a big reason why handloaders can wring consistent accuracy out of it. Pair it with a quality seating die and good brass, measure a loaded round to size your bushing, and you've got a sizing station that keeps your necks honest load after load. These dies carry Hornady's lifetime warranty and are made in the USA.

Key Specifications

  • Manufacturer: Hornady
  • Manufacturer Part Number: 046214
  • UPC: 090255462142
  • Caliber: 260 Remington (.264)
  • Die Type: Bushing Full Length Sizing Die
  • Configuration: Single die
  • Thread: 7/8-14
  • Material: Steel
  • Spindle: Free-floating with knurled lock and O-ring tensioner
  • Expander: Polished elliptical expander
  • Bushings: Interchangeable, self-centering (sold separately)
  • Origin: Made in USA
  • Warranty: Hornady Lifetime Warranty

What’s Included

  • Hornady 260 Remington Match Grade Full Length Bushing Sizing Die
  • Elliptical expander
  • Replaceable decap pin retainer
  • Sure-Loc lock ring

Frequently Asked Questions

Does the 260 Remington Match Grade die come with a bushing?

No, the neck sizing bushing is sold separately and is not included with this die. You'll need to add the correct .264 caliber Hornady Match Grade bushing to complete the setup. Bushings come in .001 inch increments so you can match your exact neck tension, and the die also accepts Redding, RCBS, and Wilson bushings.

How do I pick the right bushing for this die?

The common method is to measure the outside diameter of the neck on a loaded round, then subtract about .002 to .003 inches for your desired neck tension. That number points you to the bushing size you need. Since this is a 6mm/6.5mm caliber die for the 260 Rem, you'll be looking in the .264 bushing range.

Is this a complete die set or just the sizing die?

This is a single full length bushing sizing die, not a two-die set. It handles sizing the case body and neck but does not include a seating die. If you want a matched set, Hornady offers a Match Grade two-die set for the 260 Remington that pairs this sizer with a seating die.

Will the Hornady Match Grade die fit my press?

Yes, it uses the industry standard 7/8-14 thread, so it threads into virtually any common single stage or turret reloading press. Keep in mind you'll also need the correct shellholder for the 260 Remington, which is not included with the die.

Additional information

UPC

090255462142

Manufacturer

Manufacturer Part Number

046214

Reviews

There are no reviews yet.

Be the first to review “Hornady 260 Remington Match Grade Full Length Bushing Sizing Die”