Description
Forster built this full length sizing die to take fired .260 Remington brass and bring it right back to where it needs to be. In one stroke it sizes the neck, shoulder, and body, bumps the shoulder to set your headspace, pops out the spent primer, and expands the neck on the way back up. Each die is machined by hand with a solid one-piece reamer, which is a big reason Forster dies have earned their reputation for turning out seriously concentric ammo load after load.
This same die covers both .260 Remington and 6.5mm Remington Magnum brass, so if you shoot either cartridge you're covered. It arrives with Forster's die body ring already installed, which means it drops straight into a Forster Co-Ax press or any standard 7/8-14 threaded press without fuss. If you're running it in a conventional press you'll want the correct shellholder, though that's not needed on a Co-Ax.
What the E-Z Out Expander Ball Brings to the 260 Remington Die
The standout feature here is the elevated E-Z Out floating expander ball. Because the ball sits high in the die, the case neck passes over it while most of the case is still captured and centered inside the die body. That keeps everything aligned as the neck is expanded, which cuts down on neck runout and helps your bullets seat straighter. A lot of folks who chase accuracy find that detail alone makes the difference in how their rounds group.
Setting Up Your Forster 260 Remington Sizing Die
The expander ball runs about 0.001 inch under bullet diameter, so with normal brass springback you end up right around 0.002 inch of neck tension, which is a good all-around starting point for bolt gun loads. Knurled knobs and the adjustable decapping assembly make dialing in shoulder bump and expander height a straightforward job. Whether you're loading for a precision bolt rifle or feeding a semi-auto that needs full length sizing every cycle, this die does the work cleanly and repeatably. Made in the U.S.A.
Key Specifications
- Manufacturer: Forster Products
- Cartridge: .260 Remington / 6.5mm Remington Magnum
- Die Type: Full Length Sizing Die
- Manufacturer Part Number: 005345
- UPC: 757253007750
- Thread: 7/8-14 (standard press compatible)
- Press Compatibility: Forster Co-Ax and standard threaded presses
- Expander System: Elevated E-Z Out Floating Expander Ball
- Material: Case hardened steel
- Machining: Hand machined with one-piece reamer
- Expander Ball Diameter: 0.001 in under bullet diameter
- Country of Origin: United States
- Shipping Weight: 0.515 lb
What’s Included
- One Forster Full Length Sizing Die
- Decapping assembly with decapping pin and floating expander ball
- Forster die body ring (for Co-Ax and 7/8-14 threaded presses)
- Instructions
- Die box
Frequently Asked Questions
Does the Forster 260 Remington sizing die work in a standard press?
Yes. It comes with Forster's die body ring installed and threads into any standard 7/8-14 reloading press. It also drops right into a Forster Co-Ax press, where you won't even need a shellholder.
Is a shellholder included with this die?
No, a shellholder is not included. If you're running the die in a conventional threaded press, you'll need the correct shellholder for the .260 Remington case head. You can skip the shellholder entirely if you're using a Forster Co-Ax press.
Will this die also size 6.5mm Remington Magnum brass?
It does. Forster lists this die for both .260 Remington and 6.5mm Remington Magnum, so either cartridge is covered by the same tool.
What makes the E-Z Out expander ball different?
The expander ball is mounted high in the die so the case neck passes over it while the body is still held and centered inside the die. That alignment reduces neck runout and helps bullets seat straighter, which is where the accuracy payoff comes from.





Reviews
There are no reviews yet.