0
0

.260″ Hornady Match Grade Bushing 6mm – Neck Sizing Bushing

UPC: 090255592603

$23.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

This is the .260" neck sizing bushing from Hornady's Match Grade system, built for 6mm cartridges. It drops into Hornady's Match Grade bushing dies, both the full length and neck sizing versions, and it's what lets you take real control over how much grip your case necks put on a seated bullet. Instead of sizing every neck down to SAAMI minimum and then expanding back up, the bushing sizes the neck to the exact inside diameter you choose. That means less working of the brass and more consistency case to case.

How the .260" 6mm Bushing Dials In Neck Tension

The number on the bushing is its inside diameter. A common way to pick your size is to measure the neck diameter of a loaded round, then subtract about .001" to land on a sensible starting point. The .260" sits right in the middle of the 6mm range, which makes it a solid pick for cartridges like the .243 Winchester and 6mm PPC depending on your brass and the neck tension you're after. Since every reloader's brass thickness varies a little, having the exact bushing you need takes the guesswork out of the equation.

Why the Self-Centering Hornady Match Grade Bushing Matters

The self-centering design is the real story here. Because the bushing floats and centers itself in the die body, your necks come out concentric rather than sized off-axis, and that concentricity is a big part of what shows up as smaller groups at the range. The bushing itself is a simple, polished steel piece with a .750" outside diameter that fits Hornady's Match Grade die bodies. Hornady offers these in tight increments across the 6mm range, so if you want to fine-tune up or down from .260" you can pair it with neighboring sizes and find your sweet spot.

If you're already running a Hornady Match Grade die and reloading 6mm, this is one of those small, inexpensive pieces that makes a noticeable difference in your loaded ammo.

Key Specifications

  • Manufacturer: Hornady
  • Manufacturer Part Number: 594260
  • UPC: 090255592603
  • Inside Diameter: .260 inch
  • Outside Diameter: .750 inch
  • Caliber: 6mm
  • Type: Neck Sizing Bushing
  • Finish: Polished Steel
  • Design: Self-Centering, Interchangeable
  • Fits: Hornady Match Grade Full Length and Neck Sizing Dies
  • Quantity: 1 Bushing
  • Country of Origin: USA

What’s Included

  • One .260" Hornady Match Grade neck sizing bushing (6mm)

Frequently Asked Questions

What does this .260" Hornady Match Grade bushing fit?

It fits Hornady's Match Grade bushing dies, both the full length sizing die and the neck sizing die. The bushing is self-centering and floats in the die body, so it works the same way in either die. Keep in mind the bushing is sold separately and does not come with the die itself.

How do I know if .260" is the right bushing size for my 6mm?

The bushing number is its inside diameter, which sets your neck tension. A good starting method is to measure the outside neck diameter of a loaded round, then subtract roughly .001" to find a sensible bushing size. Since brass thickness varies between manufacturers, you may want neighboring sizes on hand to fine-tune the feel you want.

Which cartridges does the 6mm bushing range work with?

The 6mm Match Grade bushings cover a range of popular 6mm cartridges, with sizes in the .260" area commonly used for the .243 Winchester and 6mm PPC. Your exact bushing depends on your brass and the neck tension you prefer. Measuring a loaded round from your own setup is the most reliable way to confirm the size.

Why use a bushing instead of a standard neck sizing die?

A standard die typically sizes the neck all the way down to SAAMI minimum and then an expander ball opens it back up, which works the brass more than needed. A bushing sizes the neck to the exact diameter you select in one pass, so the brass gets worked less and stays more consistent. That added consistency and concentricity is what helps tighten up your groups.

Additional information

UPC

090255592603

Manufacturer

Manufacturer Part Number

594260

Reviews

There are no reviews yet.

Be the first to review “.260″ Hornady Match Grade Bushing 6mm – Neck Sizing Bushing”