0
0

Redding Type S Bushing Full Length Sizing Die 223 Remington 77111

UPC: 611760771118

$75.99

9 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Redding Type S Bushing Full Length Sizing Die is built for handloaders who want their 223 Remington ammo to run tight and consistent. Unlike a standard sizer that squeezes the neck down small and then yanks it back over an expander ball, this die sizes the neck to the exact diameter you choose using an interchangeable bushing. That means less reshaping of the brass, better concentricity, and neck tension you control down to the thousandth. It sizes the full case body and bumps the shoulder in the same stroke, so it fits right into a precision load workup.

Why the Type S Bushing Die Changes How You Size Brass

The magic here is the bushing system. Bushings are sold separately in .001" increments, so you can fine tune neck tension for whatever brass you run, whether that's Lapua, Hornady, or mixed range pickups. The common starting point is to measure the outside neck diameter of a loaded round and subtract about .002", then adjust from there based on how your rifle shoots. Some loaders prefer a touch more grip for gas gun ammo that gets cycled hard, others go lighter for a bolt gun. The bushing self-centers on the neck as it sizes, which helps keep runout low.

What Comes With the 223 Remington Type S Die

The die ships with an adjustable decapping rod fitted with a standard size button, plus a decapping pin retainer you can swap in place of the button if you turn your necks and want the bushing to do all the sizing. Adjusting the decap rod lets you position the bushing to size only part of the neck length if your chamber likes it that way. Pull the bushing and the internals out entirely and the die doubles as a body die.

Built the Way Redding Builds Everything

This is case hardened steel machined to Redding's usual tolerances, and reloaders who have run their Type S dies across multiple calibers tend to stick with them. It's a solid pick if you're chasing tighter groups and longer brass life out of your 223 or 5.56 loads. Just remember you'll need the correct bushing and a shellholder to get rolling, since both are sold separately.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 77111
  • UPC: 611760771118
  • Cartridge: .223 Remington / 5.56 NATO
  • Die Type: Type S Bushing Full Length Sizing Die
  • Die Style: Full Length Sizing
  • Material: Case Hardened Steel
  • Bushing Increments: .001 inch
  • Country of Origin: United States

What’s Included

  • One Redding Type S Bushing Full Length Sizing Die
  • Adjustable decapping rod with standard size button
  • Decapping pin retainer
  • Plastic storage box
  • Instructions

Frequently Asked Questions

Does the Redding Type S die come with bushings?

No, bushings are sold separately. The die uses interchangeable sizing bushings available in .001" increments, so you choose the size that matches your brass and desired neck tension. A shellholder is also sold separately.

How do I pick the right bushing for my 223 brass?

Measure the outside neck diameter of a loaded round with calipers or a micrometer, then subtract about .002" to account for brass spring back. That gives you a solid starting bushing size. Many loaders keep a bushing one size up and one down so they can fine tune neck tension during load development.

What makes the Type S bushing die better than a standard sizing die?

A standard die sizes the neck down small and then expands it back over a ball, which works the brass more and can hurt concentricity. The Type S bushing die sizes the neck to your exact chosen diameter in one step, reducing stress on the brass and extending case life. It also lets you control neck tension precisely for better consistency.

Can this die be used without the bushing?

Yes. By removing the bushing and the internal parts, the Type S full length die can be used as a body die that sizes the case body and bumps the shoulder without touching the neck. That gives you some extra flexibility in how you set up your reloading process.

Additional information

UPC

611760771118

Manufacturer

Manufacturer Part Number

77111

Reviews

There are no reviews yet.

Be the first to review “Redding Type S Bushing Full Length Sizing Die 223 Remington 77111”