$17.60
3 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
If you're running an Ackley Improved 223 and want your case necks trimmed dead even, the L.E. Wilson 223 Ackley Improved Fired Case Holder is the piece that makes it happen. Rather than gripping the case by the head like a standard shell holder, this one supports the body of the case along its taper, the same way the chamber of your rifle does. That chamber-style fit keeps the case aligned on axis so the cutter takes a clean, square cut every time, and it keeps the case from spinning while you're working.
The holder drops into your L.E. Wilson case trimmer base and holds the brass in place while you trim. You simply set the case in, give the head a light tap to seat it fully against the bore of the holder, and trim. Beyond trimming, the same holder works for primer pocket reaming, neck reaming, and deburring when paired with the L.E. Wilson Uniform Deburring Tool, so one piece covers several steps on your bench.
This is the FIRED version, which is built for fired and neck-sized brass. That matters because fired cases expand slightly and sit a touch fatter in the body than new or full-length resized brass. If you neck size only, this is the holder you want. Reloaders who full-length size back to factory dimensions often run a New-case holder as well, so picking based on how you prep your brass keeps the fit snug and the results tight.
L.E. Wilson has been turning out case holders and trimmers since the 1930s, and that experience shows in the tolerances here. Machined from polished steel and made in the USA, the CH-223ACK is cut for repeatability, which is exactly what you're after when you're prepping brass for an accuracy-focused Ackley Improved build. It's a simple tool that does one job and does it right.
This is the FIRED holder, so it's designed for fired and neck-sized 223 Ackley Improved brass. Fired cases sit slightly fatter in the body than new brass, and this holder is cut to match that fit. If you full-length resize back to factory dimensions, you may want a New-case holder as well.
It's built to drop into the L.E. Wilson case trimmer base, where it aligns the case by its body taper for square cuts. Some reloaders adapt Wilson holders to other setups because of the tight tolerances, but you'll get the best, most consistent results running it with a Wilson trimmer.
Yes. Besides trimming, the holder secures the case for primer pocket reaming, neck reaming, and deburring when you pair it with the L.E. Wilson Uniform Deburring Tool. It's a handy piece that covers several case-prep steps from one holder.
Supporting the case along its body taper mimics how your rifle's chamber holds the round, which keeps it aligned on axis during trimming. That means squarer cuts and better consistency from case to case. It also keeps the brass from spinning while the cutter does its work.
| UPC | 815145020475 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | CH-223ACK |
You must be logged in to post a review.
Reviews
There are no reviews yet.