Description
When you're finish chambering a 220 Swift barrel or vetting a used rifle, the GO gauge is where you start. It represents the minimum chamber dimension, so if your bolt closes on it cleanly, the chamber will accept factory ammo loaded to SAAMI maximum specs. This is the reference every gunsmith reaches for first, and Forster has built its reputation on getting these tolerances exactly right.
What the 220 Swift GO Gauge Actually Tells You
Headspace is the distance from the bolt face to the point where the cartridge stops in the chamber, and getting it right is a big deal for both safety and accuracy. Too much of it and brass can stretch or rupture; too little and rounds won't chamber. Dropping this GO gauge into the chamber and closing the action gives you a clear yes-or-no answer on the tight end of that window. It measures 1.806 inches, which is the SAAMI minimum for the cartridge, and it's ground to a mirror finish so it seats consistently every time.
Build Quality You Can Feel in the Forster GO Gauge
Forster machines these from A2 tool steel and holds them to tolerances inside 0.00015 of an inch. That kind of precision is the whole point of a gauge, since a reference tool is only as good as the standard it's cut to. The hardened steel shrugs off wear, so it'll read true through hundreds of chamberings and stay a trusted part of your bench for years.
Most builders pair the GO with a NO-GO to bracket their headspace, setting the chamber somewhere between the two. If you're spinning up a barrel or want to confirm an older Swift is still safe to run, this is the tool that tells you where you stand before you ever touch off a round.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: HG0220G
- UPC: 757253004230
- Caliber: 220 Swift
- Gauge Type: GO Length
- Length: 1.806 in
- Material: Hardened A2 Tool Steel
- Tolerance: Within 0.00015 in
- Standard: SAAMI Dimensioned
- Style: Rimless
- Finish: Precision Ground Steel
- Quantity: 1
What’s Included
- One Forster 220 Swift GO length headspace gauge
Frequently Asked Questions
What does the 220 Swift GO gauge actually check?
It checks the minimum end of your chamber's headspace. If the bolt closes on the GO gauge, the chamber is long enough to accept ammunition loaded to SAAMI maximum specs. It's the first reference gauge you use when finish chambering a barrel.
Do I also need a NO-GO gauge with this?
Most gunsmiths use the GO and NO-GO together to bracket their headspace. The GO confirms the chamber isn't too short, and the NO-GO confirms it isn't too long, letting you set the chamber safely between the two. If you're only verifying that a used rifle is safe to shoot, a FIELD gauge is the other common choice.
What is this Forster GO gauge made from?
It's machined from A2 tool steel and precision ground to tolerances within 0.00015 of an inch. That hardened construction keeps it dimensionally stable and resistant to wear through repeated use, so it stays accurate over the long haul.
Will it work on any 220 Swift rifle?
Yes, the gauge is dimensioned to SAAMI standard 220 Swift chamber specs, so it works with any correctly chambered 220 Swift bolt-action. For best results, strip the bolt of its ejector and extractor so nothing interferes with the reading.




Reviews
There are no reviews yet.