0
0

Bore Tech .22 Rimfire Proof-Positive Jag, Brass-Free Alloy 8-32

UPC: 667739980302

$11.99

64 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you clean rimfire barrels with a copper solvent, you've probably seen that frustrating blue-green smear on a patch and wondered whether your bore was still fouled or if the jag itself was fibbing to you. That blue is often the brass jag reacting with the solvent, not actual copper in your barrel. Bore Tech built the Proof-Positive line to put an end to that guessing game, and this is the .22 rimfire version machined to a #8-32 thread with a 2.26 inch length.

Instead of brass, this jag uses a proprietary brass-free alloy. It's as soft as brass so it stays completely barrel safe, but it carries much higher tensile strength, which means it won't bend or snap when you drive a tight patch through the bore. Traditional brass jags are over 60 percent copper, and that's the whole reason they throw false readings when a good copper cutter goes to work. Take the brass out of the equation and the only blue you'll see on the patch is copper coming out of your actual barrel.

What Sets the .22 Rimfire Proof-Positive Jag Apart

The rimfire version has a specific design touch worth knowing about. Rather than the rings you'll find on the centerfire jag, this one has two bands of knurling at the head. That gives you a choice in how you run your patch. You can spike it the traditional way, or wrap it around the knurled head, which a lot of rimfire folks prefer for a snug, controlled pass through those smaller bores.

Pairing the Proof-Positive Jag With Your Setup

It threads onto standard 8-32 rods and is engineered to work hand in hand with Bore Tech's Proof-Positive Bore Stix, though it'll play nice with most quality rimfire and small-bore cleaning rods. Bore Tech is a family-run outfit that machines everything in the USA, and the precision tolerances here mean the jag applies even, concentric pressure against the bore for consistent contact every stroke. For .22 LR, .22 WMR, or .17 rifles cleaned with copper solvents, it's a small upgrade that saves you patches, chemical, and second-guessing.

Key Specifications

  • Manufacturer: Bore Tech
  • Manufacturer Part Number: BTAJ-22-RF
  • UPC: 667739980302
  • Caliber: .22 Caliber Rimfire
  • Type: Patch Jag
  • Material: Brass-Free Proprietary Alloy
  • Thread Pattern: 8-32
  • Length: 2.26 in
  • Head Design: Two bands of knurling for wrapping or spiking
  • Barrel Safe: Yes
  • Country of Origin: Made in USA
  • Quantity: 1

What’s Included

  • One Bore Tech .22 Rimfire Proof-Positive Jag (BTAJ-22-RF)

Frequently Asked Questions

Why does the Proof-Positive jag matter if my old brass jag worked fine?

Brass jags are over 60 percent copper, so when you use a copper-removing solvent they react and leave a blue-green stain on your patch even when your bore is clean. This brass-free alloy jag doesn't react with those cleaners. That means the only blue you'll see is real copper fouling, so you stop wasting patches and solvent chasing a mess that isn't there.

What's the difference between the .22 rimfire jag and the .22 centerfire version?

The rimfire jag has two bands of knurling at the head instead of the two bands of rings found on the centerfire model. That knurling lets you either spike the patch or wrap it around the head, which many rimfire cleaners prefer. Both jags can technically be run on either .22 rimfire or centerfire barrels.

Will this jag fit my cleaning rod?

It uses a standard 8-32 thread, which is the common size for .22 and small-bore rods, so it fits most quality rimfire cleaning rods. It's engineered to pair with Bore Tech's Proof-Positive Bore Stix but works well with other rods that share the same thread. Just double check your rod is 8-32 before ordering.

Is the brass-free alloy safe for my barrel?

Yes. The alloy is as soft as brass, so it won't harm your bore, but it has much higher tensile strength so it resists bending or snapping under a tight patch. The precision machining also keeps pressure even and concentric against the barrel surface for consistent contact.

Additional information

UPC

667739980302

Manufacturer

Manufacturer Part Number

BTAJ-22-RF

Caliber/Gauge

.22 Caliber

Reviews

There are no reviews yet.

Be the first to review “Bore Tech .22 Rimfire Proof-Positive Jag, Brass-Free Alloy 8-32”