Description
This is the 502-series progressive charge bar from MEC, set up to meter a 1 oz. load of steel shot in sizes #3 through #6. The charge bar is the heart of how your press measures out a load, and this one handles the shot side of the equation while a removable powder bushing takes care of the powder drop. That split setup is exactly what makes MEC reloaders so easy to tune, since you can swap bushings to adjust your powder charge without ever touching the bar.
Built for Steel Shot on Progressive Presses
The 502 designation means this bar is made for MEC's progressive machines like the 650, Grabber, and Hustler, so if you're running one of those this is the right series. Steel shot is harder than lead and tends to grind and shear in a standard bar, which is why this one carries a soft insert that cushions the pellets as they drop. That insert also means you no longer need a grommet under the shot bottle. If it ever wears out from friction, it's an easy replacement using MEC part number 8440.
Matching a Powder Bushing to Your Load
Keep in mind the bar meters shot only. The powder side is handled by a separate bushing that threads into the bored powder hole, and those are sold on their own so you can match whatever recipe and powder you're loading. MEC's powder bushing chart walks you through picking the right one for your components. It's worth remembering that steel and lead charge bars are not interchangeable, so a steel bar like this one stays dedicated to your waterfowl and steel loads.
If you've been loading steel for geese, ducks, or any upland work where you want a clean 1 oz. payload in the #3 to #6 range, this bar gets you there with repeatable drops shell after shell.
Key Specifications
- Manufacturer: MEC
- Manufacturer Part Number: 50210036
- UPC: 098489013475
- Series: 502 (Progressive)
- Shot Weight: 1 oz.
- Shot Type: Steel
- Shot Size Range: #3 through #6
- Press Compatibility: MEC progressive presses (650, Grabber, Hustler)
- Powder Metering: Accepts removable powder bushing (sold separately)
- Shear Protection: Soft insert, no shot bottle grommet needed
- Replacement Insert Part: #8440
What’s Included
- One MEC 502 progressive 1 oz. #3-#6 steel shot charge bar with soft insert
Frequently Asked Questions
Which MEC presses does this 502 charge bar fit?
The 502 series is built for MEC progressive presses, including the 650, Grabber, and Hustler. If you're running a single-stage reloader instead, you'd want a 302-series bar, since the two series are not interchangeable.
Does this steel shot charge bar come with a powder bushing?
No, the bar meters shot only and the powder bushing is sold separately. The powder hole is bored to accept a removable bushing, which lets you match the exact powder charge your recipe calls for. Check MEC's powder bushing chart to select the right one for your components.
Can I use this bar for lead shot too?
No, steel and lead charge bars are not interchangeable. This bar is dedicated to steel shot and carries a soft insert to keep the harder steel pellets from shearing during the drop. Keep a separate bar on hand for your lead loads.
What shot sizes and weight will this bar drop?
It's set up to meter a 1 oz. charge of steel shot in sizes #3 through #6. That range covers a lot of common waterfowl and upland steel loads, so it's a versatile bar to keep on the bench.



Reviews
There are no reviews yet.