$11.99
1 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Redding #15 shellholder is the small but important piece that holds your case head square to the die through every stroke of the press. This one covers the 7.62x54R and the big 500 S&W Magnum, two cartridges that share the same rim dimensions and call for the #15 slot. If you're setting up to resize, deprime, seat, or crimp either of those, this is the holder that fits the bill.
Redding machines these to very close tolerances so the case sits exactly where it should, which cuts down on the little alignment headaches that lead to crooked necks or inconsistent sizing. The E-Z Feed design uses a tapered mouth that lets brass drop into place without fighting it, a real plus when you're running through a stack of cases. The whole thing is cut from solid steel and heat treated, so it holds up for the long haul and resists the wear that comes with regular use.
The universal snap-in design drops into Redding presses as well as the other popular single stage brands out there, so you don't have to be running a Redding press to use it. Outside knurling gives you a grippy surface to grab when you're swapping holders mid-session, even with lube on your fingers. It's a straightforward part that just works, and having the correct number on hand means your 7.62x54R surplus brass or your 500 S&W cases feed and size the way they're supposed to.
For anyone building out a reloading setup around those two cartridges, the #15 is the holder to reach for. Pair it with the matching dies and you're ready to run.
The #15 is sized for the 7.62x54R and the 500 S&W Magnum, which share the rim dimensions that match this holder. If you're loading either of those, this is the correct Redding number to use.
Yes. The universal snap-in design fits Redding presses along with the other popular single stage press brands, so you're not limited to one brand of equipment.
The E-Z Feed shellholders use a tapered mouth that makes dropping brass into the slot quicker and smoother than older designs. The outside knurling also gives you a better grip when you need to swap holders during a session.
It's machined from solid steel and heat treated, which helps it stand up to the repeated pressure of resizing and other reloading steps. That construction is built to last through a lot of rounds on the bench.
| UPC | 611760110153 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 11015 |
| Shipping Weight | 0.0438 |
| Style | Press Type |
You must be logged in to post a review.
Reviews
There are no reviews yet.