Description
The MEC 1-3/16 oz Lead Shot Charge Bar is the part that meters your shot and powder on MEC progressive shotshell presses. This is a 502-series progressive bar, so it belongs on progressive machines like the Grabber and 9000 family, not single-stage loaders. It drops a 1-3/16 oz lead shot charge by volume while accepting a removable MEC powder bushing (sold separately) to set your powder throw. That two-part setup lets you match the exact load recipe you are running without buying a whole new bar every time you tweak the powder.
Why the 1-3/16 oz Charge Bar Earns Its Keep
MEC machines measure by volume, not weight. The bar meters your shot drop first, then the bushing handles the powder before everything funnels into the hull and wad column. Because it works off volume, the weight stamped on the bar is a starting point rather than a guarantee. Shot density and pellet size shift things a little, so it is smart to verify your first few drops on a reliable powder scale and adjust from there. Once you confirm what the bar is throwing, you can trust it to repeat shot after shot.
Built to Handle Hard and Larger Shot
This lead shot bar is machined from hard anodized aluminum for smooth, non-stick operation and a long service life. It also carries MEC's soft insert, which helps eliminate shearing when you run larger shot sizes or harder lead. One important note on compatibility: lead and steel shot charge bars are not interchangeable, so keep this one strictly for your lead loads.
If you load trap, skeet, sporting clays, or hunting rounds in that heavier 1-3/16 oz range, this bar keeps your bench consistent and your charges honest. Pair it with the correct powder bushing for your recipe and you are ready to run.
Key Specifications
- Manufacturer: MEC (Mayville Engineering)
- Manufacturer Part Number: 5021316
- UPC: 098489012836
- Series: 502 (Progressive)
- Shot Type: Lead
- Shot Charge Weight: 1-3/16 oz
- Material: Hard anodized aluminum
- Soft Insert: Yes, helps prevent shot shearing
- Powder Bushing: Accepts removable MEC bushing (sold separately)
- Metering Type: Volumetric
- Compatibility: MEC progressive presses (Grabber, 9000, 650N)
- Quantity: 1 charge bar
- Country of Origin: Made in USA
What’s Included
- One MEC 1-3/16 oz progressive lead shot charge bar
Frequently Asked Questions
What presses does the 1-3/16 oz charge bar fit?
This is a 502-series progressive bar, so it works in MEC progressive shotshell presses like the Grabber and 9000 series. It is not designed for single-stage loaders, which use the 302-series bars. Always match the bar series to your machine type.
Does the MEC lead shot charge bar come with a powder bushing?
No, the powder bushing is sold separately. The charge bar meters your shot drop, while the removable bushing sets the powder charge, letting you fine-tune both sides of your load recipe. You pick the bushing based on the powder and load data you are using.
Can I use this bar for steel shot?
No, this is a lead shot charge bar only. Lead and steel shot charge bars are not interchangeable because the two shot types behave differently during the drop. Use a dedicated steel shot bar if you are loading steel.
Why doesn't the bar always drop exactly 1-3/16 oz?
MEC charge bars meter by volume, not by weight, so the stamped weight is a guideline rather than a guarantee. Variations in shot density and pellet size can nudge the actual weight up or down. Check your first several drops on a powder scale to confirm what the bar is throwing, then you can load with confidence.




Reviews
There are no reviews yet.