Description
Neck tension is one of those little details that separates good handloads from great ones, and this .293-inch Forster bushing lets you control it down to the thousandth. It slips into Forster's Bushing Bump Neck Sizing Die or Bushing Full Length Sizing Die and determines exactly how far the case neck gets squeezed, so you can tune bullet grip to your brass, your bullet, and your chamber instead of settling for whatever a standard die gives you.
What Makes the .293 Forster Bushing Work
Forster runs these through a super-cooling cryogenic process, which refines and closes the surface of the steel so sizing stays smooth pass after pass. Each bushing is heat treated and honed to the precise inside diameter stamped on it, in this case .293 inches. That smooth, consistent bore is what gives you clean, repeatable neck sizing and helps keep runout low on your loaded rounds.
Picking the Right Size Bushing
The common rule of thumb is to measure the outside neck diameter of a loaded round and subtract about .002 inch to land on your bushing number. Want a little more bullet grip? Drop to .003 inch instead. Keep in mind that brass work-hardens after several firings, so you may eventually want to step down a size to keep the same initial tension. Since bushings come in .001-inch increments, a lot of reloaders keep two or three on hand to fine-tune as their brass changes.
A Note on Fit and Compatibility
This is a genuine Forster bushing, and it's built specifically for Forster dies. Forster uses its own bushing dimensions, so these are not interchangeable with Redding, L.E. Wilson, Hornady, or RCBS bushings. If you're running a Forster Bushing Bump Neck or Bushing Full Length die, this is the one you want in the drawer.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: BUSH-293
- UPC: 757253998409
- Inside Diameter: 0.293 in
- Material: Steel
- Treatment: Cryogenically treated, heat treated, and honed
- Type: Neck Sizing Bushing
- Compatibility: Forster Bushing Bump Neck and Bushing Full Length Sizing Dies
- Size Increment: 0.001 in
- Country of Origin: USA
What’s Included
- One Forster .293" neck bushing (BUSH-293)
Frequently Asked Questions
Will this .293 Forster bushing fit Redding or L.E. Wilson dies?
No. Forster uses its own bushing dimensions, so these are not interchangeable with Redding, Wilson, Hornady, or RCBS bushings. This bushing is made to fit Forster Bushing Bump Neck Sizing Dies and Forster Bushing Full Length Sizing Dies only.
How do I know if .293 is the right bushing size for my loads?
Measure the outside neck diameter of a loaded round and subtract about .002 inch to find your bushing number. If you want more bullet grip, subtract .003 inch instead. Measure a few rounds since each brand of brass has a different neck wall thickness and may call for a different size.
What does the cryogenic treatment actually do for the bushing?
The super-cooling cryogenic process refines and closes the surface of the steel, giving the bushing an ultra smooth bore. That smoother finish helps the case neck size cleanly and consistently, which translates to better loaded rounds and longer bushing life.
Should I have more than one bushing on hand?
A lot of reloaders keep two or three sizes within a thousandth or two of each other. Brass work-hardens after several firings and may need a smaller bushing to hold the same neck tension, so having neighboring sizes lets you keep your loads consistent as the brass ages.




Reviews
There are no reviews yet.