Description
If you're chasing tighter groups and more consistent neck tension, the swappable bushing is where a lot of the magic happens. This .226" Forster neck bushing (BUSH-226) lets you fine tune the outside diameter of your case necks to match your brass and chamber, so you get just the right amount of grip on the bullet without overworking the brass. The idea is simple: your bushing choice sets the internal neck diameter, which means you control the tension instead of leaving it to a one-size-fits-all expander ball.
Forster makes these to a precise inside dimension and offers them in .001" steps across the lineup, so you can creep in on the exact fit you want. A common starting point is picking a bushing roughly .002" smaller than a loaded round measures at the neck, then adjusting from there as your brass work-hardens over repeated firings.
What the .226" Forster Neck Bushing Does on the Bench
This bushing drops into Forster's Bushing Bump Neck Sizing Die and Bushing Full Length Sizing Die. The bushing can be set for partial or full resizing of the case neck depending on how you run the die, which gives you flexibility for everything from light touch-ups on fire-formed brass to fuller sizing. Keep in mind these are built specifically for Forster dies and won't swap into Redding or L.E. Wilson setups.
Why the Cryogenic Treatment Matters
A smoother bushing produces better loaded rounds, which is why Forster runs these through a cryogenic process after heat treating. The super-cooling refines the steel's surface so the brass slides through cleaner, which translates to less drag, longer bushing life, and that "smooth as silk" feel reloaders look for. The necks are honed to the stated diameter, so what's printed on the bushing is what you're getting inside.
If you're turning your necks or running thick-walled brass like Lapua or Norma, having a few bushing sizes on hand lets you tune without guessing. This one covers the .226" slot in that range and pairs well with .22 caliber builds and small-bore cartridges.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: BUSH-226
- UPC: 757253998812
- Inside Diameter: 0.226"
- Type: Neck Sizing Bushing
- Material: Polished, cryogenically treated steel
- Compatibility: Forster Bushing Bump & Bushing Full Length Sizing Dies
- Available Increments: .001" steps across the lineup
- Country of Origin: USA
- Quantity: 1 bushing
What’s Included
- One (1) Forster .226" neck bushing (BUSH-226)
Frequently Asked Questions
What dies does the Forster .226" neck bushing work with?
It's designed for Forster's Bushing Bump Neck Sizing Die and Bushing Full Length Sizing Die. These bushings are made specifically for Forster dies and are not compatible with Redding or L.E. Wilson bushing dies. Make sure your die is a Forster bushing-style unit before ordering.
How do I know if .226" is the right bushing size for my brass?
A good rule of thumb is to measure a loaded round at the case neck and pick a bushing roughly .002" smaller for proper neck tension. You can also use the calculation of case neck wall thickness times two, plus bullet diameter, minus .002". Since bushings come in .001" increments, many reloaders keep a couple sizes nearby to fine tune.
Does the bushing size set my neck tension?
Yes. With a bushing bump die, there's no expander ball, so your bushing selection determines the internal neck diameter and therefore the grip on the bullet. Going to a smaller bushing increases tension, which is helpful as brass work-hardens after several firings.
What makes Forster bushings different?
Forster honds each bushing to the precise stated inside diameter, then runs them through a cryogenic treatment after heat treating. That super-cooling process refines the steel surface for smoother sizing and longer life, which helps produce more consistent loaded rounds.




Reviews
There are no reviews yet.