Description
If you're running a Forster Bushing Bump Neck Sizing Die or a Bushing Full Length Sizing Die, this .223 diameter bushing is the piece that lets you fine tune neck tension to match your brass and your rifle. The bushing determines the inside neck diameter of your sized case, so swapping to the right size gives you control that a standard one-size die just can't match. This is a single steel bushing, sized at .223 inches, and the die itself is sold separately.
What Sets the Forster .223 Neck Bushing Apart
Forster runs these bushings through a super-cooling cryogenic process after heat treating. That cryo step refines the steel's surface and closes it up, which is what gives the bore its slick, polished feel. An ultra smooth bushing means the case neck slides through with less drag, and that translates to more uniform loaded rounds and brass that lasts longer because you're not overworking it.
Picking the Right Bushing Size
A good starting point is to measure the neck diameter of a loaded round, then choose a bushing roughly .002 inches smaller than that measurement. Forster offers these in .001 inch increments, so you can get granular with your neck tension. If you're loading for a tight chamber you may want to step down smaller, and if you run thicker-walled brass without neck turning, you might size up. Ordering by the inside diameter you want keeps things simple.
How the Forster Bushing Fits Your Setup
This bushing is built for Forster's bushing style dies and is not cross-compatible with Redding, L.E. Wilson, or other brands. With no expander ball involved in that die system, your bushing choice alone sets the internal neck diameter, so having the exact size on hand matters. Made in the USA, it's a small part that makes a real difference on the bench for anyone chasing tighter groups and more consistent ammo.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number (MPN): BUSH-223
- Model: BUSH-223
- UPC: 757253998843
- Type: Neck Sizing Bushing
- Caliber: .223
- Inside Diameter: .223 inch
- Material: Cryogenically treated steel
- Compatibility: Forster Bushing Bump Neck and Bushing Full Length Sizing Dies
- Country of Origin: United States
What’s Included
- One Forster .223 diameter neck bushing (BUSH-223)
Frequently Asked Questions
What dies does the Forster .223 neck bushing work with?
It's designed for Forster's Bushing Bump Neck Sizing Dies and Bushing Full Length Sizing Dies. These bushings are not compatible with Redding, L.E. Wilson, or other brands of bushing dies. If you're running a Forster bushing style die, this is the correct insert.
Does this come with the die, or is it just the bushing?
This listing is for the single .223 bushing only. The sizing die is sold separately. You add the bushing that matches the neck tension you want for your particular brass and rifle.
How do I pick the right bushing size for my .223 handloads?
Measure the neck diameter of a loaded round, then choose a bushing about .002 inches smaller than that measurement for proper neck tension. Forster offers bushings in .001 inch increments so you can dial it in precisely. Go smaller for tight chambers, or larger if you run thicker-walled brass without neck turning.
Why does Forster cryogenically treat these bushings?
The cryogenic process refines and closes up the steel's surface after heat treating, giving the bushing an ultra smooth bore. That slick finish reduces drag on the case neck during sizing, which helps produce more uniform loaded rounds and extends the life of both your brass and the bushing.




Reviews
There are no reviews yet.