Description
Running a KeyMod handguard and need a clean way to hang a sling? The UTG PRO KeyMod QD Sling Swivel Adaptor bolts straight to the KeyMod slots on your forend and gives you a standard push-button QD socket right where you want it. No rail sections to add, no bulk, just a compact little block that disappears into your setup and gets the job done.
What Sets the TLUSW002 KeyMod Adaptor Apart
This one is machined from 6061-T6 aircraft-grade aluminum and wears a matte black hard-coat anodized finish, so it holds up to handling and weather while blending in with a black handguard. It takes up two KeyMod slots and mounts bidirectionally, meaning you can run it in a single slot or spread across adjacent slots depending on how your rail is laid out. At right around 0.4 ounces, you will not notice the weight it adds.
How the QD Swivel Housing Works
The socket accepts any standard quick-detach sling swivel with a 0.37-inch diameter stud, so it plays nice with the QD swivels you probably already own from the big sling brands. The smart part is the housing design: it uses quarter-turn rotational over-travel stops that limit how far the swivel can spin. That keeps your sling from rolling over on itself and turning into a tangled knot when you sling and unsling the rifle, which is a common gripe folks have with cheaper spin-anything mounts.
Installing the KeyMod Sling Swivel Adaptor
Installation is about as simple as it gets. It comes with the steel KeyMod locking nuts, screws, and an assembly tool in the package, so you can mount it at the kitchen table without a trip to the gunsmith. Snug the screws to the recommended torque for your rail material and you are set. It is made in the USA and backed by Leapers' lifetime warranty.
Key Specifications
- Manufacturer: Leapers / UTG PRO
- Manufacturer Part Number (MPN): TLUSW002
- UPC: 4717385552135
- Attachment Type: KeyMod
- Required KeyMod Slots: 2
- Accepts: Standard QD sling swivel with 0.37" diameter stud
- Material: 6061-T6 Aircraft Grade Aluminum
- Finish: Matte Black Hard-Coat Anodized
- Mounting: Bidirectional
- Height: 0.39 in (from mounting surface)
- Length: 1.33 in
- Width: 0.59 in
- Weight: 0.4 oz (11.34 g)
- Torque Spec: Metal rail 25 in-lbs / Polymer rail 15 in-lbs
- Color: Black
- Origin: Made in USA
What’s Included
- KeyMod QD sling swivel adaptor
- Steel KeyMod locking nuts
- Mounting screws
- Assembly tool
Frequently Asked Questions
Does the TLUSW002 come with a QD sling swivel?
No, this is the KeyMod adaptor housing only. It accepts any standard push-button quick-detach swivel with a 0.37-inch diameter stud, so you can pair it with a QD swivel you already own or add one separately.
Will this KeyMod adaptor fit my handguard?
It is designed for KeyMod-compatible handguards and forends and takes up two KeyMod slots. It mounts bidirectionally, so you can run it in a single slot or across adjacent slots to work with your rail layout. It is not compatible with M-LOK or Picatinny rails.
Does the swivel spin freely or does it stay put?
The housing is built with quarter-turn rotational over-travel stops that limit how far the swivel can rotate. That keeps the sling from spinning all the way around and twisting itself into a tangle, which is one of the main reasons people choose this mount.
Do I need a gunsmith to install the TLUSW002?
Not at all. It includes steel KeyMod locking nuts, screws, and an assembly tool, so you can install it yourself in a few minutes. Just torque the screws to the recommended spec for your rail material, which is 25 in-lbs for metal and 15 in-lbs for polymer.





Reviews
There are no reviews yet.