0
0

Q 100-298 AUS Direct Mount 34mm Black for Mini Fix Optics

UPC: 850053448751

$400.00

5 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you run a Q Mini Fix and want your glass mounted as low and clean as possible, this is the piece that gets it done. The AUS Direct Mount was developed by Q alongside Reptilia, the folks behind the original AUS mount, and the whole idea is to cut out the middleman. Instead of stacking a Picatinny rail and then a separate ring set on top of it, this mount interfaces directly with the Mini Fix receiver. Fewer parts in the stack means less height over bore, less weight, and one less thing that can shift on you. This version is built for 34mm optics and wears a black hard anodized finish.

What Makes the AUS Direct Mount Different

The mount is machined from a single block of 7075-T6 aluminum and finished with a MIL-STD Type III, Class 2 hard anodize, so it shrugs off abuse and holds up to weather. Height over bore sits at 2.6575 inches, it stands 39mm tall, and the whole thing weighs in around 5.3 ounces. The anti-snag profile keeps everything sleek, which matters on a compact rifle like the Mini Fix where you don't want a bulky optic tower throwing off the balance. It's made in the USA and backed by a lifetime warranty against manufacturer defects.

Getting Your 34mm AUS Mount Dialed In

Installation is refreshingly simple. Clear the rifle, tighten the clamp cross bolt to 45 inch pounds, then seat your optic and bring the ring cap screws down in an X pattern to roughly 15 inch pounds, or whatever your scope maker recommends. You'll want a T15 Torx driver, a hex or flat blade driver, and a torque wrench. Thread locker isn't required, though a touch of purple Loctite won't hurt anything.

Pairing It With the Rest of Your Setup

One nice bonus here is that the AUS is compatible with Reptilia's existing 30mm and 34mm ROF mounts, so you can add a red dot or other accessory down the road without reworking your base. It accepts objectives up to 77mm, which covers just about any magnified hunting or precision scope you'd want to run on a Mini Fix. For anyone chasing a lightweight, repeatable, no-nonsense optic interface, this is about as direct as it gets.

Key Specifications

  • Manufacturer: Q LLC
  • Manufacturer Part Number: 100-298
  • Model: Mini Fix
  • UPC: 850053448751
  • Optic Diameter: 34mm
  • Platform Compatibility: Q Mini Fix
  • Material: 7075-T6 Aluminum
  • Finish: MIL-STD Type III, Class 2 Hard Anodize, Black
  • Weight: 5.3 oz
  • Height: 39mm (1.54 in)
  • Height Over Bore: 2.6575 in
  • Max Objective Diameter: 77mm
  • Accessory Compatibility: Reptilia 34mm ROF Mounts
  • Country of Origin: USA
  • Warranty: Lifetime against manufacturer defects

What’s Included

  • AUS Direct Mount (34mm, Black) with integrated ring caps and mounting hardware

Frequently Asked Questions

Does the AUS Direct Mount fit the Q Fix or only the Mini Fix?

This specific mount (part 100-298) is built for the Q Mini Fix. Q makes a separate AUS Direct Mount version sized for The Fix, so make sure you're matching the mount to your exact rifle. Both share the same design philosophy, but they are not interchangeable between platforms.

Do I need a Picatinny rail to use this mount?

No, and that's the whole point. The AUS Direct Mount interfaces straight to the Mini Fix receiver, so there's no 1913 rail or extra hardware needed. That direct-to-receiver design is what keeps the optic low, cuts weight, and improves stability.

What size optic will this 34mm mount hold?

It's cut for 34mm tube optics and will accept objective bells up to 77mm in diameter. That covers most magnified precision and hunting scopes you'd realistically pair with a Mini Fix. If your optic has a 30mm tube instead, Q offers this same mount in a 30mm version.

What are the torque specs for installing the AUS Mount?

Q recommends 45 inch pounds on the clamp cross bolt and around 15 inch pounds on the ring cap screws, though you should always defer to your scope manufacturer's spec for the rings. Tighten the ring caps in an X pattern and keep the gap even on both sides. A T15 Torx driver and a torque wrench are the main tools you'll want on hand.

Additional information

UPC

850053448751

Manufacturer

Manufacturer Part Number

100-298

Model

Reviews

There are no reviews yet.

Be the first to review “Q 100-298 AUS Direct Mount 34mm Black for Mini Fix Optics”