Description
Browning took everything people liked about the X-Bolt and made it better with the second generation, and this Hunter SPR version might be the most practical of the bunch. The SPR stands for suppressor ready, and the 18 inch sporter contour barrel comes threaded from the factory with a radial muzzle brake installed and a thread protector in the box. Spin on a can and you end up with a rifle that still balances like a normal hunting gun instead of a boat oar. Even without a suppressor, the shorter barrel makes this 30-06 a joy in a shooting house, a tight treestand, or thick timber where a 24 inch tube is always catching on something.
Vari-Tech Stock Makes the X-Bolt 2 Hunter SPR Fit Like It Should
The matte black synthetic Vari-Tech stock is a big deal on this rifle. You get an adjustable length of pull, an adjustable comb, and interchangeable grip modules, so you can set the gun up to fit your build and your optic height instead of adapting yourself to the rifle. Overmolded grip surfaces keep things planted with wet gloves, and a 1.25 inch Inflex recoil pad takes the sting out of full power 30-06 loads. Between the pad and the brake, this is one of the more pleasant 30-06 rifles you'll shoulder.
Inside the X-Bolt 2 Action
The redesigned receiver adds bolt guidance surface for noticeably smoother cycling, and the short 60 degree bolt lift clears big scopes while keeping follow-up shots quick. The DLX trigger is a three lever design with essentially zero creep or overtravel, set at a hunting weight from the factory and adjustable to suit you. The action is bedded at the recoil lug and action screws with a free floated barrel, the tang safety pairs with a bolt unlock button for safe chamber checks, and the drilled and tapped receiver works with Browning's X-Lock mounting system, which uses four screws per base for a rock solid optic setup.
Fed by a 4+1 detachable rotary magazine and chambered in a cartridge that handles everything from whitetail to elk, this is a genuinely well thought out hunting rifle.
Key Specifications
- UPC: 023614870685
- Manufacturer Part Number: 036131226
- Manufacturer: Browning
- Action: Bolt Action
- Caliber: .30-06 Springfield
- Barrel Length: 18"
- Capacity: 4+1
- Barrel Finish: Matte Blued
- Muzzle: Threaded with Radial Muzzle Brake
- Stock: Matte Black Adjustable Vari-Tech Synthetic
- Trigger: Adjustable DLX Trigger
- Safety: Top-Tang with Bolt Unlock Button
- Receiver: Steel, Drilled & Tapped
- Magazine Type: Detachable Rotary
- Recoil Pad: 1.25" Inflex
- Hand: Right Hand
What’s Included
- Browning X-Bolt 2 Hunter SPR rifle
- One detachable rotary magazine
- Radial muzzle brake (factory installed)
- Thread protector
- Owner's manual
Frequently Asked Questions
Is the X-Bolt 2 Hunter SPR really suppressor ready out of the box?
Yes, that's the whole point of the SPR designation. The 18 inch barrel comes threaded from the factory with a radial muzzle brake installed, and a thread protector is included. Remove the brake and your suppressor threads right on, and the shorter barrel keeps overall length manageable with a can attached.
Will an 18 inch barrel hurt 30-06 performance for hunting?
You give up some velocity compared to a 22 inch barrel, but the 30-06 has plenty of horsepower to spare and remains fully capable on deer, hogs, and elk at practical hunting distances. What you gain is a rifle that's far easier to maneuver in blinds, treestands, and brush, and a much more sensible package once a suppressor is mounted.
What can be adjusted on the Vari-Tech stock?
The Vari-Tech system lets you adjust the length of pull and comb height, and it accepts interchangeable grip modules so you can change the grip angle to your preference. That means you can dial in proper eye alignment behind your scope and get a fit that matches your build, which pays off in comfort and consistency.
Does the X-Bolt 2 Hunter SPR come with scope bases or sights?
No, the rifle ships without sights or optic mounts. The steel receiver is drilled and tapped for Browning's X-Lock scope mounting system, which secures each base with four screws instead of the usual two for an extra solid hold. You'll want to pick up X-Lock bases or an integrated mount along with your scope.





Reviews
There are no reviews yet.