0
0

RCBS MatchMaster 6mm Creedmoor Neck Bushing Die Set

UPC: 604544654271

$173.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The RCBS MatchMaster 6mm Creedmoor Neck Bushing Die Set sits at the top of the RCBS die lineup, built for the handloader who treats neck tension as a variable worth controlling rather than leaving to chance. Instead of a one-size-fits-all expander, the sizing die runs an interchangeable neck bushing system that benchrest and long-range precision crowds have leaned on for years. Swap in a different diameter bushing and you set the exact amount of tension on the bullet, which keeps your velocity spread tight and your groups honest. It also works the brass less than a traditional sizer, so your cases tend to last longer before the necks give up.

What Makes the MatchMaster Neck Sizer Different

This is a neck sizing die, meaning it resizes the case neck while leaving the body dimensions of your fired brass alone. That's the ticket for fire-formed cases running in a single rifle. A titanium carbo nitride coated expander handles duty inside the die, cutting down on brass buildup and giving you smoother case extraction with less stretch on the neck. Keep in mind the neck bushings themselves are sold separately, so you'll want to pick up the right diameter for your brass and bullet combo. A quick way to figure it out: measure the outside neck diameter of a loaded round and subtract about .002 to .003 inch.

Seating That's Easy to Trust on the MatchMaster

The seating die is where the fit and finish really show. It carries a large oversized micrometer with big, easy-to-read numbers so you can dial seating depth to the thousandth and come right back to it later. The bullet loading window with its retaining system lets you drop a bullet in and run the press without balancing anything on a case mouth, and the free-floating, self-centering stem keeps everything aligned for straight, concentric rounds.

Each die is machined from case hardened steel, precision drilled and reamed, then hand polished and finished with the deep blued look you'd expect on a fine rifle. Standard 7/8-14 threads mean it drops into any common single stage press, and the whole set is made in the USA and backed by RCBS's limited lifetime warranty.

Key Specifications

  • Manufacturer: RCBS
  • Manufacturer Part Number: 31810
  • UPC: 604544654271
  • Cartridge: 6mm Creedmoor
  • Die Set Type: Neck Size Bushing Die Set
  • Number of Dies: 2
  • Included Dies: Neck Sizing Die, Bullet Seating Die
  • Thread Size: 7/8"-14
  • Expander: Titanium Carbo Nitride coated
  • Seating Adjustment: Oversized micrometer, free-floating self-centering stem
  • Material: Case hardened steel
  • Neck Bushings: Interchangeable, sold separately
  • Shellholder Included: No
  • Country of Origin: USA
  • Warranty: Limited Lifetime

What’s Included

  • 6mm Creedmoor neck sizing bushing die
  • MatchMaster micrometer bullet seating die
  • Titanium carbo nitride coated expander (installed in sizing die)

Frequently Asked Questions

Do I need to buy neck bushings separately for the MatchMaster 6mm Creedmoor set?

Yes. The neck bushings are sold separately so you can match the exact diameter to your brass and bullet. A good starting point is to measure the outside neck diameter of a loaded round and subtract about .002 to .003 inch, then grab a bushing or two around that number so you can fine-tune your tension.

What's the difference between this neck sizing set and a full-length bushing set?

This set uses a neck sizing die that resizes only the case neck and leaves the fired body dimensions alone, which is ideal for brass that's fire-formed to a single rifle. A full-length bushing die resizes the neck and the body together, which is the better pick if you're loading for multiple rifles or want more reliable chambering. Both control neck tension through interchangeable bushings.

Will the MatchMaster dies fit my press?

They use standard 7/8-14 threads, so they'll thread into any common single stage reloading press. RCBS does note these dies are not compatible with the older RC Supreme press. Beyond that, you're good to go with the vast majority of benches.

What makes the MatchMaster seating die worth it for 6mm Creedmoor?

The seating die has an oversized micrometer with large, easy-to-read markings so you can set seating depth to the thousandth and return to it precisely. The bullet loading window and retaining system let you drop a bullet in and run the press without fumbling it onto the case mouth, while the free-floating, self-centering stem keeps rounds straight and concentric for better accuracy.

Additional information

UPC

604544654271

Manufacturer

Manufacturer Part Number

31810

Reviews

There are no reviews yet.

Be the first to review “RCBS MatchMaster 6mm Creedmoor Neck Bushing Die Set”