0
0

Swampfox Freedom Rings II 30mm Scope Rings 1.6″ 0 MOA Black

UPC: 889157002262

$67.00

3 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Mounting a scope should be the easy part of a build, and Swampfox designed the Freedom Rings II with exactly that in mind. These are a precision-matched pair of 30mm rings built to hold your optic rock steady on a Picatinny rail. The second-generation design trimmed weight off the original Freedom Rings without giving up any of the toughness, so you get a clean, lightweight mount that still handles sustained recoil like a champ. The 0 MOA spec means there's no built-in cant, giving you a true level starting point for your zero.

What Sets the Freedom Rings II Apart

These rings are CNC machined from 7075-T6 aluminum, the same aerospace-grade alloy used in a lot of premium rifle components and the same stuff your AR-15 receiver is made of. They wear a scratch-resistant hardcoat oxidized finish in black, so they match up cleanly with a flat-top receiver and hold up to the usual bumps and handling. One of the nicest touches is the thin no-slip material pre-installed on the ring face. It grips the scope tube while you level your reticle and snug down the caps, which means no lapping and less fuss getting your optic dialed in straight.

Fit and Setup on the Freedom Rings II

The 1.6 inch centerline height is the standard choice for AR-15 and large-frame AR rifles, placing your reticle just above typical AR iron sights. That height also clears larger objective bells, so it plays well with precision scopes running up to a 56mm objective. Each ring uses only three rail slots, keeping the footprint tight on your rail.

Swampfox publishes clear torque specs to take the guesswork out of installation. The T10 star ring cap screws torque to 10 inch-pounds for even clamping that protects the scope tube, while the 1913 MIL-STD Picatinny base screws torque to 30 inch-pounds for a rail connection that won't creep under recoil. Grab a torque wrench, follow the numbers, and you'll have a repeatable, dependable mount every time.

Key Specifications

  • Manufacturer: Swampfox
  • Model: Freedom Rings II
  • Manufacturer Part Number: MRF30-M2
  • UPC: 889157002262
  • Ring Diameter: 30mm
  • Centerline Height: 1.6 in
  • Cant: 0 MOA
  • Material: 7075-T6 Aluminum
  • Finish: Scratch Resistant Hardcoat Oxidized, Black
  • Mount Type: Picatinny (1913 MIL-STD)
  • Manufacture Method: CNC Machined, Precision Matched Pair
  • Ring Cap Screws: T10 Star, 10 inch-pounds torque
  • Base Screws: 35 inch-pounds torque
  • Weight: 4.7 oz per pair
  • Quantity: Set of 2 (Pair)

What’s Included

  • 2 Swampfox Freedom Rings II (matched pair)
  • Mounting hardware (ring cap screws and Picatinny base screws)

Frequently Asked Questions

Do the Freedom Rings II need to be lapped before mounting a scope?

No, these rings are precision machined as a matched pair and do not require lapping. They also come with a thin no-slip material pre-installed on the ring face to help grip the scope tube. That keeps your optic level while you torque down the caps, which makes installation quick and straightforward.

What size scope tube do the Freedom Rings II fit?

This model is built for a 30mm scope tube, which is one of the most common sizes on modern riflescopes. Swampfox also offers a 34mm version if your optic runs the larger tube. Just double-check your scope's tube diameter before ordering so you get the right fit.

Will the 1.6 inch centerline height clear a large objective lens?

Yes, the 1.6 inch centerline height is a standard setup for AR-15 and large-frame AR rifles and will work with precision scopes featuring objective lenses up to 56mm. It places your reticle just above typical AR iron sight height. That makes it a solid all-around choice for in-line stock setups.

What rail do the Freedom Rings II mount to?

They mount to a 1913 MIL-STD Picatinny rail using the included base screws. Each ring takes up only three rail slots, so the footprint stays compact. Note that they are not designed for Weaver rails.

Additional information

UPC

889157002262

Manufacturer

Manufacturer Part Number

MRF30-M2

Reviews

There are no reviews yet.

Be the first to review “Swampfox Freedom Rings II 30mm Scope Rings 1.6″ 0 MOA Black”