Description
This EGW mount gives Kimber 1911 owners a clean way to run a red dot without sending the slide out for milling. It replaces the factory fixed rear sight by sliding into the existing dovetail, so you keep your slide stock and can always go back to irons later. The RMR footprint means it accepts the Trijicon RMR and SRO along with Holosun 407C/507C and compatible optics that share the same pattern.
Why the EGW Kimber Fixed Rear Mount Works
It's cut from 7075 aluminum and finished in a matte black hardcoat, so it holds up to real carry and range use without looking out of place on a blued or stainless Kimber. Overall it runs about 1.780 inches long and 1.1 inches wide, keeping the optic sitting low and centered over the bore. The set screw hole is drilled off-center on purpose, which lets the screw tighten against the bottom of the dovetail cut and lock the mount up tight instead of relying on the hole in the slide.
Installing the EGW RMR Sight Mount
Installation is straightforward for anyone comfortable with a sight pusher or a brass punch. You remove the factory rear sight, slide the EGW mount into the dovetail from left to right with the muzzle pointing forward, snug the set screw, and then bolt your red dot down using the included screws. A small piece of paper between the optic and the mount makes future removal easier and keeps thread locker off the sight body.
This one is built for Kimber 1911 pistols wearing a standard fixed rear sight. It is not made for Kimber Micro, Micro 9, or the Kimber Rapide, so double check your model and rear sight style before ordering. If you want a battle-ready dot setup on a trusted 1911 platform, this is the simple, reversible path to get there.
Key Specifications
- Manufacturer: EGW (Evolution Gun Works)
- Manufacturer Part Number: 49515
- UPC: 841370116584
- Fits: Kimber 1911 with Fixed Rear Sight
- Optic Fitment: Trijicon RMR, Trijicon SRO, Holosun 407C/507C
- Material: 7075 Aluminum
- Finish: Matte Black Hardcoat
- Overall Length: 1.780 in
- Overall Width: 1.1 in
- Mount Type: Rear Sight Dovetail
- Number of Bases: 1-Piece
- Color: Black
What’s Included
- EGW Kimber fixed rear Trijicon RMR sight mount
- (2) 6-32 flat head screws
- (1) 6-32 x 3/16 set screw
Frequently Asked Questions
What pistols does the EGW Kimber fixed rear RMR mount fit?
It's designed for Kimber 1911 pistols that use a standard fixed rear sight. It does not fit the Kimber Micro, Micro 9, or the Kimber Rapide. Check your pistol's rear sight style before ordering to be sure it matches.
Which red dot sights work with this mount?
The mount uses the Trijicon RMR footprint, so it accepts the Trijicon RMR and SRO as well as Holosun 407C and 507C optics that share that pattern. Any red dot built on the RMR footprint should bolt right up using the included hardware.
Do I have to modify my slide to use this Kimber RMR mount?
No milling required. You simply remove the factory fixed rear sight and slide this mount into the existing dovetail, so your slide stays unmodified. You can pull the mount later and reinstall your rear sight anytime you want to go back to irons.
Why is the set screw hole off-center?
That's intentional. The off-center hole lets the set screw tighten against the bottom of the dovetail cut, creating upward force that locks the mount firmly in place. The set screw isn't meant to drop into the hole in the slide.




Reviews
There are no reviews yet.