$28.99
10 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Nylon bore brushes earn their spot in the cleaning kit anytime you reach for a copper solvent. Bronze and phosphor brushes are loaded with copper themselves, so strong copper removers eat away at the bristles and leave blue on your patches even when your bore is already clean. Nylon sidesteps that whole problem. These Sinclair International brushes are sized for .22 caliber bores and come a full dozen to the pack, so you have replacements on hand for the whole season instead of hunting for one when you need it.
The standout detail here is the looped brass core. Instead of the wire being cut off flush at the tip, Sinclair loops it back, which keeps a sharp end from ever dragging against your chamber, throat, or crown. That little touch is exactly what you want on a precision bore. The nylon bristles are gentle on rifling but still stiff enough to work fouling loose with a solvent doing the heavy lifting.
Each brush uses a #8-32 male thread, which is the standard pattern on the vast majority of rifle cleaning rods, jags, and adapters. If you run Dewey, Tipton, Pro-Shot, or most other common rod systems, these thread right on with no adapter needed. Sinclair makes their nylon brushes a touch oversized compared to bore diameter so they fill the barrel properly and actually contact the rifling.
Run them wet with your solvent of choice and push in a single direction where you can. Nylon is the smart call with ammonia-based and fast-acting copper cleaners like Sweet's or similar, since those formulas will strip a bronze brush in a hurry. Keep a bronze brush around for general carbon scrubbing and let these nylon brushes handle the copper work. Buying a dozen at once means you can retire a worn brush without a second thought and keep your cleaning routine consistent.
Nylon is the go-to when you clean with copper solvents. Aggressive copper removers dissolve the copper right out of bronze and phosphor bristles, which wears the brush down and turns your patches blue even when the bore is clean. Nylon isn't affected by those solvents, so you get an accurate read on your fouling and a longer-lasting brush.
Almost certainly. Each brush uses the #8-32 male thread that is standard on most rifle cleaning rods, jags, and adapters, including Dewey, Tipton, and Pro-Shot systems. They thread right on with no adapter needed.
Sinclair loops the wire core back on itself at the tip instead of cutting it off flush. That eliminates any sharp exposed end that could scratch your chamber, throat, or crown as the brush passes through. It's a nice detail for anyone who cares about protecting a precision bore.
Yes. A .22 caliber brush is sized for the .223/.224 bore diameter, which covers .223 Remington and 5.56 NATO along with .22 rimfire and other .22 centerfire rifles. Just note that some tight or match barrels have snug tolerances, so a brush may pass with a little more resistance.
| UPC | 608060400121 |
|---|---|
| Manufacturer | |
| Caliber/Gauge | .22 Caliber |
| Quantity | 12 |
You must be logged in to post a review.
Reviews
There are no reviews yet.