Description
The Redding 6mm GT Competition Seating Die (part number 55199) is built for handloaders who care about where the bullet sits and want that number to stay put, round after round. This is Redding's top-tier seater, the patented design that set the standard for straight-line bullet seaters and solved the concentricity headaches that plague ordinary seating dies. For a cartridge like the 6mm GT, which lives in the precision and benchrest world, that kind of consistency is the whole point.
The heart of this die is the floating seating stem system. Tighter manufacturing tolerances come from how that stem is built, and the fit between the bullet guide and the stem is close enough that the stem can essentially float on a column of air. The stem itself is precision ground to match bullet diameter, and before any seating happens, the case and bullet are fully supported and aligned inside a close-fitting ground sleeve. The bullet goes in straight, and runout stays low.
Dialing In Your 6mm GT Seating Die
Up top you get a micrometer head calibrated in .001 inch increments. It adjusts smoothly without clicks, so you can land on an exact seating depth rather than splitting the difference between detents. There's also a zero-set feature, which lets you set the micrometer to your rifle's pet seating depth and return to it later without guesswork. If you run multiple bullets or chase the lands as your throat wears, that repeatability saves a lot of fiddling.
What the Redding 55199 Does and Doesn't Do
This is a dedicated seating die, not a full set, and it does not crimp. It ships with the standard profile seating stem that handles most bullet shapes well. If you're loading long VLD or high-BC projectiles and want a stem contoured to match, Redding offers a VLD stem (55724) separately. A shellholder is also sold separately, so check your bench before the first session. Pair this die with a 6mm GT sizing die and you've got a precision loading setup ready to feed your match rifle.
Key Specifications
- Manufacturer: Redding Reloading
- Model: Competition Seating Die
- Manufacturer Part Number: 55199
- UPC: 611760551994
- Caliber: 6mm GT
- Die Type: Bullet Seating Die
- Case Type: Bottleneck
- Micrometer Adjustment: .001 inch increments, infinitely adjustable (no clicks)
- Seating Stem: Standard profile, precision ground to bullet diameter
- Zero-Set Feature: Yes
- Crimps Bullet: No
- Number of Dies: 1
- Shipping Weight: 0.92 lb
What’s Included
- One Redding 6mm GT Competition Seating Die with micrometer head
- Standard profile seating stem (installed)
- Die box
Frequently Asked Questions
Does the Redding 6mm GT Competition Seating Die crimp the bullet?
No, this is a straight-line seating die only and it does not apply a crimp. If you need to crimp your 6mm GT loads, you'll want to add a separate crimp die. Most precision 6mm GT shooters run these loads without a crimp anyway, relying on neck tension for consistency.
Does this die come with a shellholder?
No, the shellholder is sold separately. The 6mm GT shares a shellholder with cartridges that use a similar case head, so it's worth confirming the correct size before your first loading session.
Can I use VLD or high-BC bullets with the 55199 seating die?
It ships with Redding's standard profile seating stem, which contacts most common bullet shapes well. For long VLD or high-BC projectiles that want a stem matched to their ogive, Redding offers a dedicated VLD stem (part 55724) sold separately. Swapping the stem is quick and keeps your seating consistent across bullet profiles.
What makes the Competition Seating Die better than a standard seater?
The patented floating stem design fully supports and aligns the case and bullet inside a close-fitting ground sleeve before seating begins, which cuts down on runout. The micrometer head also lets you set seating depth in .001 inch increments and return to your favorite depth with the zero-set feature. For a precision cartridge like the 6mm GT, that repeatability shows up on the target.





Reviews
There are no reviews yet.