0
0

Hornady Custom Grade Series IV Neck Sizer Die – 22 K-Hornet

UPC: 090255460667

$35.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you shoot a 22 K-Hornet out of a bolt gun and you're chasing tighter groups, neck sizing is one of the simplest ways to get there. The Hornady Custom Grade Series IV Neck Sizer Die touches only the case neck, leaving the body and shoulder at their fire-formed dimensions. That means your brass stays matched to your chamber, the bullet lines up better with the bore, and you squeeze more loadings out of each piece before it wears out.

This die is precision machined and polished to a smooth internal finish, so cases run in and out without sticking or dragging. It uses Hornady's removable Elliptical Expander, which they build to beat the old-style ball expander by reducing friction and cutting down on case neck stretch as the mouth passes over it. A hardened, headed decap pin knocks out spent primers in the same stroke, and the whole spindle assembly locks positively to keep your decapping and expanding consistent pass after pass.

Why the Series IV Neck Sizer Earns Its Spot

Neck sizing shines for folks who fire the same brass through the same rifle over and over. By skipping full-length resizing, you avoid overworking the body of the case and you knock out headspace problems that come from pushing the shoulder back too far. The payoff is better concentricity and brass that simply lasts longer. Keep in mind this approach is meant for cases fired in bolt-action rifles, since autoloaders, levers, and pumps generally want full-length sizing for reliable chambering.

Setting Up the 22 K-Hornet Neck Sizer

The die ships with a Hornady Sure-Loc lock ring that clamps around the entire die body and applies even pressure to hold your setting. The locking screw tightens without ever touching the die threads, so you won't chew them up, and the wrench flats let you pull and reinstall the die without reaching for pliers. It threads into any standard 7/8-14 press. You'll need a shell holder for the 22 Hornet case head, and it's sold separately if you don't already have one on the bench.

Key Specifications

  • Manufacturer: Hornady
  • Manufacturer Part Number: 046066
  • UPC: 090255460667
  • Caliber: 22 K-Hornet
  • Die Type: Neck Sizer Die
  • Series: Custom Grade Series IV
  • Number of Dies: 1
  • Thread Size: 7/8"-14
  • Expander: Removable Elliptical Expander
  • Lock Ring: Sure-Loc
  • Shellholder Included: No
  • Country of Origin: USA

What’s Included

  • Neck Sizer Die
  • Sure-Loc Lock Ring
  • Removable Elliptical Expander
  • Headed Decap Pin
  • Decap Pin Retainer

Frequently Asked Questions

What's the difference between neck sizing and full-length sizing with this die?

This Series IV die sizes only the case neck and leaves the body and shoulder at their fire-formed dimensions, while a full-length die resizes the entire case back toward factory specs. Neck sizing keeps your brass matched to your chamber for better bullet alignment and longer case life. It's the way to go when you're reloading the same brass through the same rifle.

Can I use the Hornady neck sizer die in a semi-auto or lever gun?

Neck sizing is intended for cases fired in bolt-action rifles. Autoloaders, lever guns, and pump actions typically need full-length resizing so the rounds chamber reliably. If you run a semi-auto, you'll want a full-length die instead.

Does the 22 K-Hornet die come with a shell holder?

No, the shell holder is sold separately. You'll need the correct shell holder for the 22 Hornet case head to run this die. If you already load the 22 Hornet or K-Hornet, there's a good chance you have the right one on the bench.

Will this die fit my reloading press?

Yes, it uses standard 7/8-14 threads, so it threads into any common single-stage or progressive press. The included Sure-Loc lock ring holds your setting with even pressure and has wrench flats for easy install and removal without pliers.

Additional information

UPC

090255460667

Manufacturer

Manufacturer Part Number

046066

Caliber/Gauge

22 K-Hornet

Reviews

There are no reviews yet.

Be the first to review “Hornady Custom Grade Series IV Neck Sizer Die – 22 K-Hornet”