Description
These Hornady ELD Match bullets are the 6.5mm (.264 diameter) 130 grain projectile that precision handloaders keep coming back to. They pair a sleek secant ogive, a long boat-tail, and a highly concentric AMP jacket over a lead core, which adds up to one of the best ballistic coefficients in its class. Hornady lists a G1 BC of .554 and a G7 of .279, with a sectional density of .266, and those numbers hold true because they were verified with Doppler radar, not just calculated on paper.
What the Heat Shield Tip Does for ELD Match Bullets
The thing that sets the ELD Match apart is the Heat Shield tip. Hornady found that standard polymer tips on high-BC bullets can soften and deform from aerodynamic heating during flight, which chips away at the BC and accuracy past a few hundred yards. The Heat Shield material resists that heat and keeps a uniform meplat, so the bullet flies consistent from the muzzle all the way out to the far end of the range.
Loading the 130 gr 6.5mm ELD Match
This 130 grain weight is a favorite in the 6.5 Creedmoor, and it also finds a home in cartridges like the 6.5×47 Lapua and 260 Remington. It's on the lighter end of the popular 6.5 match bullets, which lets you run a little more velocity while still carrying plenty of BC for wind bucking and retained energy at distance. Hornady recommends a minimum 1:9 twist to stabilize it properly, so check your barrel before you start a workup.
Range-Proven Accuracy from the 6.5mm ELD Match
Reloaders report groups well under half an inch with this bullet in a dialed rifle, and its reputation for tight, repeatable SDs makes it a solid baseline when you're developing new loads. Whether you're shooting PRS stages, ringing steel at a thousand yards, or just chasing that one-hole group off the bench, the 130 grain ELD Match gives you a dependable, high-performance component to build around.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 26177
- UPC: 090255261776
- Model: ELD Match
- Bullet Caliber: 6.5mm (.264)
- Bullet Diameter: .264"
- Bullet Weight: 130 gr
- Bullet Type: ELD-Match, Polymer Tip Boat Tail
- Tip Material: Heat Shield Polymer
- Jacket Material: AMP
- Core Material: Lead
- Ballistic Coefficient (G1): .554
- Ballistic Coefficient (G7): .279
- Sectional Density: .266
- Minimum Recommended Twist: 1:9"
- Quantity: 100 per box
What’s Included
- 100 Hornady ELD Match 6.5mm .264 130 gr bullets
Frequently Asked Questions
What barrel twist do I need for the 130 gr 6.5mm ELD Match?
Hornady recommends a minimum 1:9 twist to properly stabilize this 130 grain bullet. Most modern 6.5 Creedmoor and 6.5mm precision barrels run a 1:8 twist, which stabilizes it with no trouble. If you have an older or slower barrel, check your twist rate before building a load.
Are these ELD Match bullets loaded ammo or components?
These are component bullets only, meant for handloading. The box contains 100 projectiles with no brass, powder, or primers. You'll need your own reloading components and data to assemble finished cartridges.
What's the ballistic coefficient of the 130 gr 6.5mm ELD Match?
Hornady lists a G1 BC of .554 and a G7 of .279, with a sectional density of .266. Those numbers were verified using Doppler radar rather than calculated, so they reflect real-world flight. The Heat Shield tip keeps the BC from degrading at extended range.
What cartridges is the 130 gr ELD Match good for?
This .264 diameter bullet is a popular pick for the 6.5 Creedmoor and works well in other 6.5mm cartridges like the 6.5×47 Lapua and 260 Remington. The lighter 130 grain weight lets you push a bit more velocity while still carrying a high BC. It's a strong option for both competition and long-range target work.







Reviews
There are no reviews yet.