Description
The Nosler AccuBond .338 Cal 300 gr Spitzer is one of the heavier projectiles in Nosler's premium bonded lineup, and it's a favorite among handloaders chasing serious big game. At 300 grains with a 0.375 sectional density, this is a bullet that drives deep and holds together, making it a solid match for the big .338 magnums where penetration and energy transfer matter most.
What Sets the AccuBond .338 300 gr Apart
The heart of this bullet is Nosler's proprietary bonding process, which fuses the copper-alloy jacket to the lead-alloy core and eliminates voids. That bond is what keeps the jacket and core working together through impact, so you get uniform expansion and strong weight retention without the kind of fragmentation that can cut a wound channel short. The tapered jacket is also designed to minimize barrel fouling, so cleanup stays reasonable even after a long range session.
Ballistics and Build of the .338 300 gr AccuBond
Up front, the white polymer tip resists deforming, feeds smoothly through the action, and initiates expansion on impact. Out back, the boat-tail base does double duty: it makes seating easier at the loading bench and gives the mushroomed bullet a solid platform for a wide, controlled upset. With a G1 ballistic coefficient of 0.720 and an overall length of 1.750 inches, this Spitzer profile holds velocity and bucks wind well, which is exactly what you want when the shots stretch out.
Putting the AccuBond .338 to Work
This is a reloading component, not a loaded round, so you'll be seating these in your own brass. The .338 diameter 300 grain pill is a natural fit for cartridges like the .338 Lapua, .338 Remington Ultra Magnum, and .340 Weatherby where the extra bullet weight really earns its keep on elk, moose, big bears, and heavier plains game. There's no cannelure on this bullet, so you've got flexibility in setting your seating depth to tune for your rifle.
Key Specifications
- Manufacturer: Nosler
- Manufacturer Part Number: 54851
- UPC: 054041548519
- Series: AccuBond
- Bullet Caliber: .338 Caliber
- Bullet Diameter: 0.338 in
- Bullet Weight: 300 grain
- Bullet Profile: Spitzer
- Bullet Base: Boat Tail
- Tip Material: White Polymer Tip
- Jacket Material: Copper Alloy
- Core Material: Lead Alloy (Bonded)
- Ballistic Coefficient (G1): 0.720
- Sectional Density: 0.375
- Overall Length: 1.750 in
- Cannelure: No
What’s Included
- 50 Nosler AccuBond .338 Cal 300 gr Spitzer bullets (reloading components, not loaded ammunition)
Frequently Asked Questions
Are these Nosler AccuBond .338 300 gr bullets loaded ammunition or just the projectiles?
These are reloading components, meaning you're getting the bullets only, not complete cartridges. You'll seat them in your own prepped and primed brass with your chosen powder charge. They're intended for handloaders building their own .338 caliber loads.
What cartridges can I load the AccuBond .338 300 gr in?
This 0.338 diameter bullet works in any .338 caliber cartridge, and the heavy 300 grain weight shines in the big magnums like .338 Lapua, .338 Remington Ultra Magnum, .338-378 Weatherby, and .340 Weatherby. These cases have the capacity to push a 300 grain bullet to useful velocities. Always confirm your rifle's twist rate will stabilize a bullet this long and heavy.
Does the AccuBond .338 300 gr have a cannelure?
No, this bullet does not have a cannelure. That gives you the freedom to set your own seating depth and tune the load for best accuracy in your particular rifle. Just be mindful of neck tension since you won't be crimping into a groove.
What makes the AccuBond hold together better than a standard bullet?
The core is bonded to the jacket through Nosler's proprietary process, which eliminates voids and keeps the two from separating on impact. The result is excellent weight retention and controlled, uniform expansion for deep penetration. That bonded construction is why the AccuBond is a go-to for larger, tougher big game.





Reviews
There are no reviews yet.