0
0

Winchester Invector-Plus 12 Gauge Modified Flush Choke Tube

UPC: 048702186035

$26.99

4 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Modified choke is the workhorse of the choke world, and Winchester's Invector-Plus version is a smart way to get your 12 gauge patterning right. With a .020 constriction, it lands squarely in that sweet spot between an open Improved Cylinder and a tight Full, holding pellets together out to around 35 to 45 yards. That makes it a go-to for ducks over decoys, pass shooting geese at reasonable range, pheasants breaking out of the cover, and knocking down sporting clays. If you only keep one tube screwed in for general hunting, this is usually the one.

What the Invector-Plus Design Brings to the Table

Winchester built the Invector-Plus system to work hand in hand with their back-bored barrels. The longer internal taper produces more consistent, uniform patterns with fewer fliers, so more of your shot ends up where you're aiming. The design also seals off gases from slipping between the tube and the barrel, which protects both the choke and the bore over the long haul. It's a durable setup that holds up well to steel shot, which matters a lot for waterfowl folks.

Build and Fit of This Winchester Modified Tube

This one is machined from 17-4 stainless steel with a black finish and installs flush with the muzzle for a streamlined look. It's rated for steel, lead, and other non-toxic loads, so you don't have to overthink your shell selection. It fits 12 gauge Winchester shotguns threaded for Invector-Plus, including the Super X2, Super X3, Super X4, SXP pump, Supreme, Select, and Model 101, and it also works in Browning barrels cut for the same system.

Keep in mind this is a single flush-mount tube, not a full set, so make sure Modified is the constriction you're after. A dab of choke tube grease on the threads and a proper wrench for install will keep it seating smoothly and coming back out clean season after season.

Key Specifications

  • Manufacturer: Winchester
  • Manufacturer Part Number: 613053
  • UPC: 048702186035
  • Gauge: 12 Gauge
  • Choke Constriction: Modified
  • Constriction Diameter: .020
  • Configuration: Invector-Plus
  • Type: Flush Mount
  • Material: 17-4 Stainless Steel
  • Finish: Black
  • Shot Approved: Steel, Lead, Non-Toxic
  • Recommended Range: Up to about 45 yards
  • Chokes Included: One
  • Ported: No

What’s Included

  • One Winchester Invector-Plus 12 Gauge Modified flush choke tube

Frequently Asked Questions

What shotguns does the Winchester Invector-Plus Modified choke fit?

It fits 12 gauge Winchester shotguns threaded for the Invector-Plus system, including the Super X2, Super X3, Super X4, SXP pump, Supreme, Select, and Model 101. It also works in Browning barrels cut for Invector-Plus. It will not fit standard Invector or other brand thread patterns, so confirm your barrel is marked Invector-Plus before ordering.

Can I shoot steel shot through this Modified choke?

Yes. This tube is rated for steel, lead, and other non-toxic loads, which makes it a solid choice for waterfowl hunters running steel. The Invector-Plus design is built to hold up well to steel shot without harming the tube or barrel.

What is the effective range of a Modified choke?

A Modified choke like this one has a .020 constriction and shines in the mid-range, roughly 35 to 45 yards. It's the most versatile of the standard chokes, balancing pattern density and spread. That makes it a reliable all-around pick for ducks over decoys, upland birds, and sporting clays.

Does this come as a set or just one choke tube?

This is a single Modified flush-mount choke tube, not a full set. If you want to round out your kit with other constrictions like Improved Cylinder or Full, you'll need to grab those separately. Just double check that Modified is the one you need before ordering.

Additional information

UPC

048702186035

Manufacturer

Manufacturer Part Number

613053

Caliber/Gauge

12 Gauge

Chokes Included

One Choke

Product Type

Flush

Reviews

There are no reviews yet.

Be the first to review “Winchester Invector-Plus 12 Gauge Modified Flush Choke Tube”