Description
There's something fitting about a Model 94 chambered in .38-55 Winchester. That cartridge was one of the two original chamberings when John Browning's design hit the market back in 1894, so this rifle brings the story full circle. The Trails End Takedown adds Browning's takedown mechanism to the mix, letting you split the rifle into a barrel assembly and stocked receiver assembly in seconds. Slip both halves into a pack, behind a truck seat, or into a short case, then thread the magazine tube back together at camp and you're holding a full 38 inch rifle again with zero fuss.
A Model 94 Takedown Built the Right Way
Today's Model 94s come out of the Miroku factory in Japan, and the fit and finish on these rifles regularly draws comparisons to the pre-64 guns. The 20 inch button rifled barrel wears a brushed polish blue that matches the steel receiver, and the Grade I black walnut stock has a satin finish with traditional straight grip lines. Round locking bolt trunnions keep the lever throw smooth and quick, the bolt relief cut reduces hammer drag, and the articulated cartridge stop feeds rounds from the six shot tube without chewing them up. A steel loading gate rounds out the details that matter when you handle the gun every day.
Sights, Safety, and Scope Options on the Trails End
A Marble Arms bead front sight and adjustable semi-buckhorn rear get you on target fast, and the receiver comes drilled and tapped if you'd rather run glass. Winchester even includes a knurled hammer spur extension, and the hammer is drilled and tapped to accept it, which makes cocking easy with a scope mounted. The top tang safety sits right where your thumb expects it, and the rebounding hammer adds another layer of peace of mind.
At 6 pounds 12 ounces, this is a carry-all-day rifle. The .38-55 pushes a heavy, wide bullet at moderate velocity, which translates to mild recoil and serious authority on deer and black bear inside typical woods distances. It's a classic in every sense, and one you can take just about anywhere.
Key Specifications
- Manufacturer: Winchester Repeating Arms
- Model: Model 94 Trails End Takedown
- MPN: 534191117
- UPC: 048702003851
- Caliber: .38-55 Winchester
- Action: Lever Action
- Capacity: 6 Rounds, Full-Length Tubular Magazine
- Barrel Length: 20"
- Overall Length: 38"
- Weight: 6 lbs 12 oz
- Twist Rate: 1:15"
- Stock: Grade I Black Walnut, Satin Finish, Straight Grip
- Metal Finish: Brushed Polish Blued
- Sights: Marble Arms Bead Front, Adjustable Semi-Buckhorn Rear
- Safety: Top Tang
- Length of Pull: 13.5"
What’s Included
- Winchester Model 94 Trails End Takedown rifle
- Knurled hammer spur extension
- Owner's manual
Frequently Asked Questions
How does the takedown feature work on the Model 94 Trails End?
The rifle separates into two pieces: the barrel and magazine tube assembly and the stocked receiver assembly. To reassemble, you fit the two halves together and give the end of the magazine tube a few turns until everything locks up tight. No tools needed, and it takes seconds once you've done it a couple times.
Is the .38-55 Winchester a good hunting cartridge?
It is, especially inside 150 yards or so. The .38-55 throws a heavy, wide-diameter bullet at moderate velocity, so it hits with real authority on deer and black bear while keeping recoil pleasant. It's one of the two original Model 1894 chamberings, and factory ammo is still produced by several makers.
Can I mount a scope on the Winchester 94 Trails End Takedown?
Yes. The receiver comes drilled and tapped for scope mounts from the factory, and the angle eject design clears spent brass away from a mounted optic. Winchester also includes a knurled hammer spur extension, so you can still cock and decock the hammer comfortably with a scope in place.
Who manufactures the current Winchester Model 94?
Current production Model 94s are built by Miroku in Japan under license from Winchester. The Miroku-made rifles have a strong reputation for fit, finish, and machining quality, and many enthusiasts consider them among the best Model 94s ever produced. Parts support is available through Winchester.





Reviews
There are no reviews yet.