0
0

Burn Proof Gear Suppressor Cover Heavy 8″ x 1.5″ FDE Kevlar

UPC: 644042980694

$225.00

10 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

A hot suppressor will ruin your day fast. After a few mag dumps, a bare can gets hot enough to melt slings, scorch pants, and brand your forearm during transitions. The Burn Proof Gear Suppressor Cover Heavy solves that problem with a two-piece design built from aerospace and military grade fire retardant materials. The outer shell is DuPont Kevlar rated to a 1000 degree Fahrenheit operating temperature, which works out to roughly 180 rounds of M855 fired through your can. Underneath sits a fiberglass mesh liner rated to 2000 degrees, so the cover keeps working even when you push a hard firing schedule.

Sized for a True No-Slip Fit

This 8 inch cover is built for suppressors measuring 7.5 inches long and exactly 1.5 inches in diameter. Burn Proof Gear cuts every Heavy cover a half inch longer than the suppressor on purpose, letting the cover cinch down around both the front and rear of the can so it stays put shot after shot. Once installed, the whole package adds minimal bulk, keeping the overall diameter at 1.75 inches or less, and the cover itself weighs only a few ounces. It works with suppressors in any caliber, from .223 and 300 BLK up through .308 and 7.62 NATO.

More Than Just Burn Protection

Beyond saving your skin and gear, this Heavy cover cuts down heat mirage rising off the can, which matters a lot when you are trying to hold a clean sight picture through a magnified optic during a long string. It also reduces the IR signature a hot suppressor throws off under night vision. The Flat Dark Earth color blends nicely with tan and coyote rifle builds.

Why the Burn Proof Gear Heavy Cover Earns Its Keep

These covers are made in the USA, have seen serious hard use in the field, and carry a lifetime guarantee from Burn Proof Gear. Just double check your can measures 1.5 inches in diameter and 7.5 inches long before ordering, and this cover will serve you for years.

Key Specifications

  • Manufacturer: Burn Proof Gear
  • Model: Suppressor Cover Heavy
  • Manufacturer Part Number: BPG-SC-H-8-1-5-FDE
  • UPC: 644042980694
  • Color: Flat Dark Earth
  • Cover Length: 8 inches (fits 7.5 inch suppressors)
  • Fits Suppressor Diameter: 1.5 inches
  • Outer Material: DuPont Kevlar, rated to 1000°F
  • Inner Liner: Fiberglass mesh sleeving, rated to 2000°F
  • Installed Diameter: 1.75 inches or less
  • Design: Two-piece cover with cinching no-slip fit
  • Caliber Compatibility: .223, 5.56 NATO, 300 BLK, .308, 7.62 NATO
  • Country of Origin: USA
  • Warranty: Lifetime guarantee

What’s Included

  • Burn Proof Gear Heavy suppressor cover, 8" x 1.5", FDE
  • Fiberglass mesh inner sleeving liner

Frequently Asked Questions

What size suppressor does the 8 inch Burn Proof Gear Heavy cover fit?

This cover fits suppressors that are 7.5 inches long and exactly 1.5 inches in diameter. Burn Proof Gear intentionally makes each cover a half inch longer than the can so it cinches around the front and rear for a no-slip fit. If your suppressor falls outside those measurements, look at a different length or one of their custom covers.

How much heat can the Suppressor Cover Heavy handle?

The Kevlar outer shell has a maximum operating temperature of 1000°F, which equals roughly 180 rounds of M855 through the can. The inner fiberglass mesh liner is rated all the way to 2000°F. As a rule of thumb, a suppressor heats up about 7°F per round of 5.56, and once the cover gets too hot to touch you should let it cool completely before resuming fire.

Will this cover stay put during rapid fire or under recoil?

Yes, that is the whole point of the extra half inch of length. The cover cinches down at both ends of the suppressor so it grips the can instead of walking forward under recoil. If a cover does slide forward, it usually means it was not installed correctly, and Burn Proof Gear has installation tutorials that walk you through the process.

Does a suppressor cover help with heat mirage?

It does. Heat rising off a bare can distorts your sight picture through a magnified optic, especially during longer strings of fire. This cover insulates that heat, cutting mirage significantly for precision work, and it also reduces the IR signature a hot suppressor gives off under night vision.

Additional information

UPC

644042980694

Manufacturer

Manufacturer Part Number

BPG-SC-H-8-1-5-FDE

Color

Flat Dark Earth

Model

Product Type

Cover

Reviews

There are no reviews yet.

Be the first to review “Burn Proof Gear Suppressor Cover Heavy 8″ x 1.5″ FDE Kevlar”