0
0

Burn Proof Gear Heavy Suppressor Cover 8.5″ x 1.5″ Black Kevlar

UPC: 644042980625

$225.00

17 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Anyone who has dumped a couple of fast mags through a can knows how quickly that tube turns into a branding iron. The Burn Proof Gear Suppressor Cover Heavy exists to fix exactly that, and it does the job better than most. This 8.5 inch black cover is built for suppressors measuring 1.5 inches in diameter, and it runs about a half inch longer than the can itself so the ends cinch down around the front and rear. That cinch is what gives it the no-slip fit Burn Proof Gear is known for. Once it's snugged down, it stays put through rapid fire, transitions, and rough handling instead of walking forward like cheaper wraps tend to do.

Two-Piece Construction That Takes Real Heat

The Heavy cover is a two-part system. The outer shell is DuPont Kevlar rated to 1000°F, which works out to roughly 180 rounds of M855 fired hard. Underneath sits a replaceable fiberglass mesh sleeving liner rated to 2000°F, so the layer taking the worst abuse can be swapped out instead of tossing the whole cover. That replaceable liner is a big reason these covers last as long as they do, and it's part of why Burn Proof Gear backs them with a lifetime guarantee. Everything is made in the USA from aerospace and military grade fire retardant materials, and the design is full auto capable up to that 1000°F ceiling.

More Than Just Burn Protection

Beyond keeping your legs, pants, and sling off a hot can during transitions, this cover knocks down heat mirage over the suppressor, which matters a lot on precision rifles when you're trying to hold a clear sight picture after a string of fire. It also cuts the IR signature a hot suppressor throws off under night vision. The whole setup adds only about a quarter inch to the diameter, so the total package stays under 1.75 inches and won't hang up in most rail or handguard setups. It works across .223, 300 BLK, 5.56 NATO, .308, and 7.62 NATO cans, as long as your suppressor measures 1.5 inches across.

Key Specifications

  • Manufacturer: Burn Proof Gear
  • Model: Suppressor Cover Heavy
  • Manufacturer Part Number: BPG-SC-H-8-5-1-5-BLK
  • UPC: 644042980625
  • Color: Black
  • Length: 8.5 inches
  • Fits Suppressor Diameter: 1.5 inches
  • Outer Material: DuPont Kevlar, fire retardant
  • Inner Liner: Fiberglass mesh sleeving, replaceable
  • Kevlar Heat Rating: 1000°F (approx. 180 rounds of M855)
  • Inner Liner Heat Rating: 2000°F
  • Installed Outer Diameter: Under 1.75 inches
  • Full Auto Capable: Yes, up to 1000°F
  • Caliber Compatibility: .223, 5.56 NATO, 300 BLK, .308, 7.62 NATO
  • Country of Origin: USA
  • Warranty: Lifetime guarantee

What’s Included

  • Burn Proof Gear Heavy Suppressor Cover, 8.5" x 1.5", Black
  • Fiberglass mesh inner sleeving liner

Frequently Asked Questions

Will the Burn Proof Gear Heavy Suppressor Cover fit my suppressor?

This cover is sized specifically for suppressors that are 1.5 inches in diameter, so measure your can before ordering. The 8.5 inch length is meant to run about a half inch longer than an 8 inch suppressor, which lets the ends cinch down over the front and rear for a secure fit. If your can is a different diameter, Burn Proof Gear makes other sizes to match.

How much heat can this suppressor cover handle?

The Kevlar outer shell is rated to 1000°F, which translates to roughly 180 rounds of M855 fired in a hard string, and the fiberglass inner liner is rated to 2000°F. It's full auto capable up to that 1000°F mark. Like any suppressor cover, it's protection for realistic firing schedules, not an excuse to belt-dump until the can glows.

Does the cover add much bulk or shift under fire?

It adds roughly a quarter inch, so a 1.5 inch suppressor stays under 1.75 inches with the cover installed. The design cinches at both ends, which is what Burn Proof Gear calls the no-slip fit, and it holds position through rapid fire and transitions without creeping toward the muzzle.

Can I replace the inner liner if it wears out?

Yes, and that's one of the smartest parts of the Heavy design. The fiberglass mesh sleeving is a separate replaceable piece, so when the liner takes enough heat abuse you can swap it out instead of buying a whole new cover. That two-part system stretches the life of the cover considerably, and Burn Proof Gear stands behind these with a lifetime guarantee.

Additional information

UPC

644042980625

Manufacturer

Manufacturer Part Number

BPG-SC-H-8-5-1-5-BLK

Color

Black

Model

Product Type

Cover

Reviews

There are no reviews yet.

Be the first to review “Burn Proof Gear Heavy Suppressor Cover 8.5″ x 1.5″ Black Kevlar”