Description
The 6.8 Western was built for exactly the kind of hunting this rifle is named after: long pokes across sage flats and canyon country where a 165 to 175 grain .277 caliber bullet still hits with authority at distance. The X-Bolt 2 Western Hunter Special gives that cartridge the barrel it deserves, a 24 inch tube with fast-twist rifling that stabilizes those heavy, high BC bullets and squeezes out the velocity the round was designed around. You get near-magnum energy downrange with recoil that stays civil enough to actually watch your hits.
Stainless Steel Built for Ugly Weather
The barreled action on this Western Hunter Special is matte stainless, which matters when your season includes wet snow, sleet, and mornings that soak everything you own. The barrel is free floated and the muzzle comes threaded with a protector installed, so adding a suppressor or brake is a five minute job. The X-Bolt 2 action is the real upgrade over the original, with additional bolt guidance surface that keeps the spiral fluted bolt running smooth and bind-free even when you cycle it fast, plus the short 60 degree bolt lift that clears big scope bells.
Getting Fit and Trigger Right on the X-Bolt 2
Browning put the money where it counts here. The black synthetic stock has an adjustable comb so you can line your eye up behind the optic instead of craning your neck, and the Inflex recoil pad takes a real bite out of felt recoil. The DLX trigger is a three-lever design that breaks clean with no creep or overtravel, preset at 3.5 pounds and adjustable down to 3. The stainless receiver is drilled and tapped for Browning's X-Lock mounting system, which uses four screws per base instead of the usual two for a rock-solid optic setup. Feeding comes from a detachable rotary magazine holding three rounds, with one more in the chamber. A tang safety and bolt unlock button round out a rifle that is ready for elk camp the day you pick it up.
Key Specifications
- Manufacturer Part Number: 036118299
- UPC: 023614869429
- Caliber: 6.8 Western
- Action: Bolt Action
- Barrel Length: 24", threaded with thread protector
- Twist Rate: 1:7.5"
- Capacity: 3+1, detachable rotary magazine
- Barrel and Receiver: Matte stainless steel
- Stock: Black synthetic with adjustable comb
- Trigger: Adjustable DLX, factory set at 3.5 lb
- Optics Mounting: Drilled and tapped, X-Lock scope mount system
- Recoil Pad: Inflex
- Safety: Top-tang with bolt unlock button
What’s Included
- Browning X-Bolt 2 Western Hunter Special rifle
- One 3-round detachable rotary magazine
- Muzzle thread protector
- Owner's manual
Frequently Asked Questions
Can the X-Bolt 2 Western Hunter Special stabilize heavy 6.8 Western bullets?
Yes. Browning cuts its 6.8 Western barrels with a fast 1:7.5 twist, which is exactly what the long, heavy 165 to 175 grain .277 caliber bullets need to stay stable. That is the whole point of the cartridge, so factory loads like Winchester Expedition Big Game shoot very well out of this setup.
Is the barrel threaded for a suppressor or muzzle brake?
It is. The 24 inch stainless barrel comes threaded from the factory with a thread protector installed, so you can spin on a can or a brake without a trip to the gunsmith. If you want extra recoil reduction, Browning's Recoil Hawg brake is a popular add-on for the X-Bolt 2 line.
Does the Western Hunter Special come with a scope or bases?
No optic or bases are included. The stainless receiver is drilled and tapped for Browning's X-Lock mounting system, which uses four screws per base instead of the usual two for a more secure hold. X-Lock bases and rings are sold separately, and standard X-Bolt pattern mounts fit as well.
Is the trigger on the X-Bolt 2 adjustable?
Yes. The DLX trigger is a three-lever design that comes preset at 3.5 pounds and can be adjusted down to 3 pounds. It breaks with essentially no creep, take-up, or overtravel, and it is one of the better factory triggers you will find on a hunting rifle in this class.




Reviews
There are no reviews yet.