Description
Browning built its name out West, and the X-Bolt 2 Western Hunter Special feels like it was designed by people who still hunt there. This 6.5 Creedmoor version wears a 22 inch matte stainless threaded barrel over a stainless receiver, which matters more than it sounds when you're glassing ridges in sleet or packing out in the rain. The muzzle comes threaded with a protector installed, so adding a suppressor or brake down the road is a five minute job instead of a gunsmith trip.
Why the X-Bolt 2 Action Earns Its Keep
The second generation X-Bolt received a reworked receiver with added bolt guidance surface, and you can feel it. The bolt runs smooth and straight with a short 60 degree lift that keeps your knuckles clear of the scope. Browning's DLX trigger is a three lever design with no creep or overtravel, preset at 3.5 pounds and adjustable down to 3. Feeding comes from a detachable rotary magazine that centers each round into the chamber, protecting bullet tips from getting battered under recoil. Capacity is 4+1, plenty for a hunting rifle.
A Western Hunter Special That Fits You
The black composite stock includes an adjustable comb system, which is a bigger deal than most folks realize. Getting your eye lined up behind the scope consistently is half the battle in real accuracy, and being able to raise the comb to match your optic height means a natural cheek weld every time you shoulder the rifle. An Inflex recoil pad softens what little the 6.5 Creedmoor kicks, and the receiver is drilled and tapped for Browning's X-Lock mounting system, which uses four screws per base for a rock solid scope setup.
Where the Western Hunter Special Shines
This is a rifle for the hunter who wants one do-it-all bolt gun. The 6.5 Creedmoor shoots flat, bucks wind well with high BC bullets, and stays pleasant enough to practice with all summer. Mount a good scope, find the load your barrel likes, and this Browning will hold up its end of the deal for a long, long time.
Key Specifications
- Manufacturer: Browning
- Manufacturer Part Number: 036118282
- UPC: 023614869405
- Caliber: 6.5mm Creedmoor
- Action: Bolt Action
- Barrel Length: 22"
- Barrel Finish: Matte Stainless
- Muzzle: Threaded, thread protector included
- Capacity: 4 + 1
- Magazine: Detachable rotary magazine
- Stock: Black composite with adjustable comb system
- Trigger: DLX adjustable, preset at 3.5 lbs
- Receiver: Stainless steel, drilled and tapped for optics
- Recoil Pad: Inflex
- Safety: Top-tang with bolt unlock button
What’s Included
- Browning X-Bolt 2 Western Hunter Special rifle
- One 4-round detachable rotary magazine
- Muzzle thread protector
- Owner's manual
Frequently Asked Questions
Is the barrel on the X-Bolt 2 Western Hunter Special threaded for a suppressor?
Yes, the 22 inch stainless barrel comes threaded from the factory with a thread protector installed. That makes it simple to run a suppressor or muzzle brake whenever you're ready. Just spin off the protector and thread on your device.
Does this rifle come with a scope or scope bases?
No, it ships without optics or bases. The receiver is drilled and tapped and designed around Browning's X-Lock mounting system, which secures each base with four screws instead of the usual two for a more stable scope setup. You'll want to pick up X-Lock bases or rings separately.
How is the trigger on the X-Bolt 2 Western Hunter Special?
It uses Browning's DLX trigger, a three lever design with essentially no take-up, creep, or overtravel. It comes set at 3.5 pounds from the factory and can be adjusted down to about 3 pounds. Out of the box it breaks clean enough that most hunters never touch the adjustment.
Will original X-Bolt magazines work in the X-Bolt 2?
Browning's rotary magazines are cataloged for both the X-Bolt and X-Bolt 2, so spares are easy to find and cross-compatible in matching calibers. This 6.5 Creedmoor model feeds from a 4-round rotary mag that centers rounds into the chamber to protect bullet tips.




Reviews
There are no reviews yet.