Description
There's a reason the factory brass bead on most shotguns gets replaced the second folks realize how much easier a fiber optic is to pick up. The Truglo TG947ERM Long Bead trades that washed-out dot for a glowing red fiber that pulls light right off the rib and puts it front and center. On a fast-swinging clays gun or a field gun in low light, that little bit of extra pop makes lining up shots feel a whole lot more natural.
What Sets the TG947ERM Long Bead Apart
This is a CNC-machined metal bead, not a cheap plastic housing, and Truglo built the Long Bead line to be the go-to bead replacement across a huge range of shotguns. The red fiber runs 0.078 inches in diameter and stretches 0.5 inches long, which is where the "long" name comes from. That extended length soaks up more ambient light than a stubby fiber, so the bead stays bright whether you're on an overcast dove field or under gray winter skies.
Fitment and the 3mm Thread on the Long Bead
This particular model uses a 3mm thread, which covers a lot of popular over/unders and semi-autos including many Browning, Franchi, Caesar Guerini, Charles Daly, Mossberg Reserve, Weatherby, and Winchester shotguns. The 3mm thread is one of the most common metric bead sizes out there, so if your gun runs a screw-in front bead in that size, this drops right in. Take a second to confirm your existing bead threads out and matches the 3mm spec before ordering, since Truglo makes this same sight in several other thread patterns.
Getting the Long Bead Dialed In
Installation is about as simple as gun work gets. Back out your old bead by hand or with a small bead wrench, thread the Truglo in, and snug it down. No gunsmithing, no drilling, no fuss. Most people have it done in a couple of minutes at the kitchen table and are back to seeing that bright red dot the next time they shoulder the gun. It's an easy, affordable upgrade that makes an older shotgun feel a little more modern every time you swing it.
Key Specifications
- Manufacturer: Truglo
- Manufacturer Part Number: TG947ERM
- Model: Long Bead
- UPC: 788130491621
- Fiber Color: Red
- Fiber Diameter: 0.078 in
- Fiber Length: 0.5 in
- Thread Size: 3mm
- Base Material: CNC-Machined Metal
- Product Type: Fiber Optic Bead
- Style: Fiber Optic Front Sight
- Firearm Fit: Shotgun
What’s Included
- Truglo TG947ERM Long Bead 3mm red fiber optic front sight
- Mounting screw(s) for installation
Frequently Asked Questions
Will the TG947ERM Long Bead fit my shotgun?
This model uses a 3mm thread, which is common on many Browning, Franchi, Caesar Guerini, Charles Daly, Mossberg Reserve, Weatherby, and Winchester shotguns with a screw-in front bead. The best way to be sure is to thread out your current bead and check that it matches the 3mm size. Truglo also offers this same Long Bead in several other thread patterns if yours turns out to be different.
How hard is it to install the Truglo Long Bead?
It's about as easy as shotgun upgrades get. You back out the old bead by hand or with a small bead wrench, thread the Truglo in, and snug it down. No gunsmithing or drilling required, and most folks finish the swap in just a couple of minutes.
What's the difference between the Long Bead and a standard fiber optic bead?
The Long Bead uses an extended 0.5-inch fiber rather than a short one. That extra length gathers more ambient light, so the red dot stays brighter in low-light and overcast conditions. It's a noticeable difference on dove fields, in the duck blind, or on gray-sky clays days.
Does this fiber optic come in other colors?
This exact model, the TG947ERM, is the red version. Truglo makes the Long Bead line in green as well, and both colors come in the various thread sizes. Red tends to stand out well against green backgrounds like fields and trees, while green pops nicely against darker targets.





Reviews
There are no reviews yet.