Description
Full-power 10mm out of a pistol this size sounds like a handful until you understand what KRISS built into the Vector. The Super V Recoil Mitigation System is a delayed blowback design that sends the bolt energy downward through a low-mass slider instead of straight back into your hands, which counters muzzle rise before it starts. Pair that with a bore axis sitting below the fire control group, roughly in line with your second knuckle, and you get a 10mm that stays flat during rapid strings in a way that has to be felt to be believed.
What Sets the Vector SDP G3 Apart
The Gen 3 update reworked both the upper and lower housings for better hand support and more mounting real estate. You get a full-length Picatinny top rail for optics, an interchangeable AR-style pistol grip so you can swap in whatever feels right, an ambidextrous mag release and short-throw safety, and a skeletonized trigger with minimal pre-travel. The 5.5-inch 4140 chrome moly barrel wears a black nitride finish and comes threaded 9/16-24 for muzzle devices. Tool-less four-pin disassembly keeps cleaning simple, and low profile flip-up sights get you on target out of the box.
Glock 20 Mag Compatibility in a 10mm Vector
Feeding from full-size Glock 20 pattern magazines is one of the smartest things about this platform. If you already run a 10mm Glock, your mags and ammo pull double duty, and aftermarket support is everywhere. One thing worth knowing: the Super V system likes full-power loads, so feed it proper 10mm and it runs happy.
A Two-Tone Finish You Won't See Everywhere
This Black and FDE combination is a distributor exclusive configuration, so it stands apart from the standard single-color Vectors on most shelves. Whether it ends up as a trail companion, home defense piece, or the range gun everyone asks about, this one earns its spot in the safe.
Key Specifications
- Caliber: 10mm Auto
- Action: Semi-Auto, Closed Bolt Delayed Blowback (Super V System)
- Barrel Length: 5.5 in, 4140 Chrome Moly, Black Nitride Finish
- Muzzle Thread: 9/16-24 RH
- Overall Length: 15.35 in
- Weight: Approx. 5.6 lbs
- Magazine Compatibility: Full-Size Glock 20 Pattern
- Sights: Low Profile Flip-Up
- Top Rail: Full-Length MIL-STD 1913 Picatinny
- Grip: Interchangeable AR-15/M16 Pattern Pistol Grip
- Controls: Ambidextrous Magazine Release and Short-Throw Safety
- Finish: Two-Tone Black/FDE
- Manufacturer: KRISS USA (TDI)
- Manufacturer Part Number: KV10-3P2T00
- UPC: 810172122857
What’s Included
- KRISS Vector SDP G3 10mm pistol
- One Glock 20 pattern magazine
- Low profile flip-up sights (installed)
- Owner's manual
Frequently Asked Questions
Does the Vector SDP G3 10mm use Glock magazines?
Yes, it feeds from full-size Glock 20 pattern 10mm magazines. That means easy mag sharing if you already own a 10mm Glock, plus wide aftermarket availability. KRISS also makes the MagEx2 extension that bumps a factory Glock mag up to 33 rounds of 10mm.
How does the Super V system tame 10mm recoil?
Instead of sending bolt energy straight back at you, the Super V delayed blowback system directs it downward through a low-mass slider that moves in channels perpendicular to the barrel. Combined with a bore axis that sits below the trigger group, the design counteracts muzzle flip. The result is a 10mm that stays noticeably flatter than conventional blowback guns during fast follow-up shots.
Is the barrel on the Vector SDP G3 threaded for a suppressor or muzzle device?
Yes, the 5.5-inch barrel comes threaded 9/16-24 RH from the factory. The 4140 chrome moly barrel also wears a durable black nitride finish. Just make sure your muzzle device or mount matches that thread pitch, since it differs from common 9mm threading.
Does the Vector run reliably with all 10mm ammo?
The delayed blowback operating system needs enough energy to cycle, so it performs best with full-power 10mm loads. Very light target loads or soft reloads can cause sluggish cycling. Stick with standard or full-power factory ammunition and the platform runs like a champ.





Reviews
There are no reviews yet.