Description
There is a lot of competition in the sub-Benelli inertia gun market, and the Retay ACE is one of the few that brings something new to the table instead of just copying the homework. This 20 gauge version wears full Mossy Oak Bottomland camo over a 26 inch vent rib barrel, weighs in at a friendly 6 pounds 6 ounces, and feeds 3 inch shells through a 3+1 capacity tube. It balances between the hands the way a good field gun should, which makes long carries and quick swings feel natural.
What Makes the Retay ACE Inertia Plus Different
Standard inertia actions have one well-known quirk: bump the butt against a tree or boat gunwale and the bolt can slip out of battery, giving you a click when you need a bang. Retay's Inertia Plus system adds a torsion spring that keeps the rotating bolt locked into the chamber, so that failure point is off the table. It also lets you ease the bolt closed quietly, a small thing until a wary gobbler is hung up at 60 yards. The deep bore drilled barrel and lengthened forcing cone are the other half of the story, tightening shot-to-shot consistency and putting more pellets where they belong.
An ACE 20 Gauge That Plays Well with Accessories
Retay drilled and tapped the steel receiver from the factory, so adding a red dot for turkey season takes minutes instead of a gunsmith trip. The ACE series also accepts Benelli Crio Plus pattern choke tubes and magazine extensions, which opens up a huge aftermarket, and it ships with five flush-mount chokes so you can pattern for anything from close timber ducks to late-season roosters right away. The safety button reverses for left-handed use, a shim kit lets you dial in stock fit, and the Airy Pad recoil system takes a real bite out of felt recoil. A TruGlo fiber optic front bead rides the vent rib for a fast, bright sight picture in low light. For a do-it-all 20 gauge that covers the duck hole, the turkey woods, and upland cover, this one earns its spot in the safe.
Key Specifications
- Manufacturer Part Number: B-ACEMBL-26
- UPC: 193212045331
- Gauge: 20 Gauge
- Chamber: 3"
- Action: Semi-Auto, Inertia Plus
- Barrel Length: 26" Vent Rib, Deep Bore Drilled
- Capacity: 3+1
- Overall Length: 48"
- Weight: 6 lbs 6 oz
- Receiver: Steel, Drilled and Tapped for Optics
- Sights: TruGlo Fiber Optic Front Bead
- Safety: Reversible Button
- Stock: Synthetic with Adjustable Shim Kit
- Finish: Mossy Oak Bottomland
- Choke Compatibility: Benelli Crio Plus Pattern
What’s Included
- Retay ACE 20 gauge semi-auto shotgun
- Five flush-mount choke tubes (C, IC, M, IM, F)
- Choke tube wrench
- Stock shim kit
- Owner's manual
- Limited lifetime warranty card
Frequently Asked Questions
Does the Retay ACE accept Benelli choke tubes?
Yes, and that is one of the big upgrades in the ACE series. The barrel is cut for the Benelli Crio Plus pattern, so chokes that fit newer Benelli guns will thread into this one. It also ships with five flush-mount tubes covering Cylinder through Full, so most hunters are set right out of the box.
Can I mount a red dot on the Retay ACE 20 gauge?
You can. The steel receiver comes drilled and tapped from the factory, so mounting a rail or micro red dot is a simple screwdriver job. That makes this Bottomland version a natural pick for turkey hunters who want an optic in the timber.
Is the ACE a good fit for left-handed hunters?
It is more accommodating than most. The safety button reverses from right to left hand operation, and the overall control layout is ambidextrous. Combine that with the included shim kit for adjusting stock fit and lefties can set this gun up properly without aftermarket parts.
What is the difference between the Retay ACE and the ACE-R?
They share the same Inertia Plus action, internals, and features. The difference is the receiver profile: this ACE has a traditional slope-back receiver while the ACE-R wears a slight hump-back shape, similar to the classic Browning look. It comes down to which sight picture and styling you prefer.




Reviews
There are no reviews yet.