Description
The RM1C showed up on the scene at SHOT Show 2024 and turned some heads. A brand-new American firearms company out of Dallas, Texas putting out a compact 9mm loaded with features that usually live behind a much higher price tag is the kind of thing worth paying attention to. The striker-fired, polymer-framed RM1C runs a 4-inch hammer-forged barrel with a low bore axis that keeps the gun flat and easy to control. The Tenifer-treated steel slide resists corrosion and wear, and the whole package weighs in at a trim 21 ounces unloaded with the flush magazine. Overall length is 7.1 inches, and at just 1.1 inches wide at the grip, it carries and conceals well for its capacity.
What Makes the RM1C Stand Out in the Compact 9mm Market
Rost Martin packed a lot of thoughtful detail into this gun. The flat-face trigger has a built-in blade safety and breaks at around five pounds with a short, audible reset that reviewers consistently praised. The slide serrations front and rear are deep and aggressive, and the top of the slide is serrated as well to cut down on glare when you're picking up your sights. Speaking of sights, they are steel and dovetail-mounted, not plastic, with a white dot up front and a serrated blacked-out rear. The grip itself features Rost Martin's Responsive Grip Texturing (RGT), a proprietary graduated laser stippling that firms up its grip on you the harder you squeeze, while staying comfortable enough for all-day carry. Modular backstraps, an extended beavertail, undercut trigger guard, and textured index points on both sides of the frame round out an ergonomic package that punches well above the RM1C's price point.
RM1C Optic-Ready Setup and Accessory Compatibility
The slide comes milled and ready for a red dot right out of the box, with a metal RMR-compatible plate included. That single footprint opens the door to a wide range of popular optics including the Trijicon RMR and SRO, Holosun 407C, 507C, 508T, and 509T, the Leupold DeltaPoint Pro, and several Swampfox models. Additional mounting plates for other footprints are available directly through Rost Martin. The full three-slot Picatinny rail up front handles most popular weapon lights without issue. Holster support from well-known makers was established at launch, and the RM1C's dimensions are close enough to the Glock 19 that many existing G19 holsters fit it as well.
The RM1C ships with both a flush-fit 15-round magazine and an extended 17-round magazine, each with witness holes and a bright yellow follower. The funneled magazine well aids fast reloads, and the ambidextrous magazine release works equally well for lefties. Backed by Rost Martin's lifetime warranty, this is a legitimate carry-ready pistol that has held up well in independent long-term testing across multiple publications.
Key Specifications
- Manufacturer: Rost Martin
- Model: RM1C
- MPN: RM1CBLKOSP15
- UPC: 860011125860
- Caliber: 9mm Luger
- Action: Striker-Fired
- Barrel Length: 4"
- Barrel Type: Hammer-Forged Steel
- Overall Length: 7.1"
- Height: 5.0" (with flush magazine)
- Width: 1.1"
- Weight (Unloaded): 21 oz
- Capacity: 15+1 (flush) / 17+1 (extended)
- Frame: Black Polymer with Picatinny Rail
- Slide Finish: Black Tenifer (Nitrocarburized)
- Sights: White Dot Front / Serrated Black Rear (Steel, Dovetail-Mounted)
- Optic Cut: RMR Footprint (Plate Included)
- Grip Texture: Responsive Grip Texturing (RGT) with Modular Backstraps
- Controls: Ambidextrous Magazine Release
- Warranty: Lifetime
What’s Included
- Rost Martin RM1C pistol
- 15-round flush-fit magazine
- 17-round extended magazine
- RMR-compatible optic mounting plate (with hardware)
- Blank slide cover plate
- 3 modular backstraps
- Owner's manual
- Custom-cut foam-lined box
Frequently Asked Questions
What optics are compatible with the RM1C's optic-ready slide?
The RM1C ships with a metal RMR-footprint plate installed, which opens it up to a wide range of popular red dots including the Trijicon RMR, SRO, and RCR, Holosun 407C, 507C, 508T, and 509T, the Leupold DeltaPoint Pro, and several Swampfox models. Additional mounting plates for other footprints are available through Rost Martin's website. The plate system sits at a reasonable height and most shooters find it easy to get a natural point of aim with an optic mounted up.
How does the Rost Martin RM1C compare in size to the Glock 19?
The RM1C is very close in size to the Glock 19, with a 7.1-inch overall length, 5-inch height with the flush magazine, and a 1.1-inch width at the grip. Multiple reviewers noted that it fits many existing Glock 19 IWB holsters with little to no modification needed. It is a true compact size that carries well for its 15+1 capacity.
Does the RM1C come with more than one magazine?
Yes, the RM1C includes two magazines from the factory: a flush-fit 15-rounder that keeps the grip profile compact, and an extended 17-round magazine with a +2 basepad. Both feature witness holes and a bright yellow follower so you can see your round count at a glance. The magazines are also compatible with CZ P-10 series pistols.
What is the trigger pull like on the RM1C?
The RM1C uses a flat-face steel trigger shoe with an integrated blade safety and is rated at approximately five pounds. In independent testing it measured slightly over that right out of the box, which is normal for a new striker-fired pistol. The reset is short and audible, and the break is generally described as clean and crisp for a factory trigger at this price point.
Is the Rost Martin RM1C actually made in the USA?
Yes. The RM1C is manufactured by Rost Martin in Dallas, Texas and carries no import markings. Reviewers who examined the pistol closely noted that the slide, barrel, and frame all carry domestic part numbers consistent with American production. The company was founded by Chris and Stefany Toomer, with the RM1C debuting at SHOT Show 2024 as Rost Martin's inaugural model.
What holsters fit the Rost Martin RM1C?
Rost Martin established holster support from several well-known manufacturers at launch, including ANR Design, Blackpoint Tactical, CrossBreed, DeSantis, and We The People, among others. Because the RM1C is dimensionally close to the Glock 19, many G19-specific holsters also work well. If you plan to carry it with an optic mounted, look for holsters specifically cut for the RM1C with an optic allowance.




Reviews
There are no reviews yet.