$779.00
4 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The .38 Super has always had a strong following among serious 1911 people, especially those who run competition. It delivers a flatter trajectory and sharper muzzle velocity than most factory .45 ACP loads, and it fits naturally in the 1911 platform since the cartridge length is much closer to the .45 ACP than the 9mm is. Girsan's MC1911S Influencer X leans into all of that and adds a layer of modern practicality that makes it genuinely versatile.
The construction starts with a fully machined forged steel frame and slide, not cast. That matters for long-term durability and fit. The slide features lightening cuts to reduce moving mass, which translates to quicker cycling and cleaner follow-up shots. One of the more interesting engineering choices here is the cone-and-wedge style barrel lockup instead of the traditional barrel bushing found on most 1911s. Combined with a reverse-crowned bull barrel, this system is designed to provide tighter, more consistent lockup for improved shot-to-shot accuracy. The rear sight is fully adjustable for elevation and windage, and it pops off entirely to reveal a factory-cut RMSc optic footprint when you're ready to mount a red dot.
The ergonomics are dialed in for people who actually shoot. The extended beavertail keeps your hand high on the grip and eliminates slide bite, the front strap and mainspring housing are checkered for a confident hold under recoil, and the high-texture synthetic grips add extra purchase without being abrasive. The oversized flared magazine well makes reloads fast and reliable, which matters in a match environment. Ambidextrous thumb safeties are standard, which is a detail you'd usually pay a premium for on a 1911 at this level.
The trigger is where Girsan's quality control really shows up. The factory pull weight sits around 4.5 lbs with a clean, crisp break and minimal overtravel. American Rifleman called it out specifically as impressive for the price point, and that's a hard-to-fake quality that becomes obvious as soon as you run a few magazines through it. EAA actually accuracy-tests each Influencer X at the factory and drops the verified target into the box, which is a nice touch that builds confidence before you ever hit the range.
The full-length Picatinny rail on the dustcover gives you plenty of real estate for lights and lasers, and the two-tone tungsten frame with black slide Cerakote finish isn't just eye-catching, it's a durable protective coating built to handle regular use. This is a well-thought-out package for .38 Super fans looking for a modern 1911 that doesn't require a second mortgage to buy or a gunsmith to tune.
The .38 Super has been a staple in practical shooting competition for decades, particularly in IPSC Open Division, where it allows competitors to reach major power factor with lighter recoil than a .45 ACP. Its flat trajectory and higher muzzle velocity make it well-suited to speed-focused stages. Factory ammo availability is more limited than 9mm or .45 ACP, so many serious .38 Super competitors also reload, which lets them tailor loads to their specific setup.
The Influencer X is cut for the Shield RMS/RMSc footprint, which is one of the most common optic mounting standards for 1911-style pistols. To mount a red dot, simply remove the fully adjustable rear sight, which lifts off to expose the cut. RMSc-compatible optics from several brands will drop right onto the factory-machined cut without additional milling.
No, and that's actually one of the more interesting design choices on this pistol. Instead of the classic barrel bushing setup, the Influencer X uses a cone-and-wedge style lockup, similar to what you see on many double-stack competition 1911s. The .38 Super model also features a reverse-crowned bull barrel, which protects the muzzle crown from damage and contributes to consistent lockup and accuracy.
The factory trigger on the Influencer X is one of its standout qualities. Pull weight is set around 4.5 lbs with a clean, crisp break and very little overtravel. It uses a skeletonized trigger design and has received consistent praise from reviewers who note it performs well above what you'd expect for the price bracket. EAA also tests each pistol for accuracy at the factory and includes the target in the box.
Yes, the Influencer X ships with ambidextrous thumb safeties standard, which is not always the case on 1911s at this price range. The extended beavertail and high-texture grips work equally well for both right- and left-handed users. The controls are well-positioned for a natural grip regardless of which hand you shoot with.
The Influencer X is the upgraded model in Girsan's 1911 lineup and includes several features not found on the standard Influencer, most notably the factory optic cut for the RMSc footprint, the cone-and-wedge barrel lockup with a bull barrel, lightening cuts on the slide, and the full-length Picatinny dustcover rail. The standard Influencer MC1911 is a capable gun, but the Influencer X is built with competition and optic-ready use more squarely in mind.
| UPC | 741566907562 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 391530 |
| Action | |
| ATF Type | Pistol |
| Barrel Length | 5" |
| Caliber/Gauge | .38 Super Auto |
| Capacity | 9 + 1 |
| Color | Black |
| Length | 11.7000 |
| Model | |
| Number of Magazines | 1 9 rd. |
| Package Height | 3.7 |
| Package Width | 8.9 |
| Product Type | Semi-Auto Pistol |
| Safety | Ambidextrous |
| Shipping Weight | 4.35 |
| Sights | Tactical Sights |
| Sights Type | Adjustable Sights |
| State Restriction (CA) | NO DIRECT SHIP TO CALIFORNIA |
You must be logged in to post a review.
Reviews
There are no reviews yet.