Description
Big-bore ARs have a reputation for being heavy, clunky, and overbuilt. The Saint Victor V2 in .308 goes the other direction. At 8.1 pounds unloaded with a 38.5 inch overall length, it swings and shoulders more like a carbine than a typical AR-10, and the 16 inch 4150 chrome moly vanadium barrel is a big part of why. The continuous taper profile trims weight where it isn't needed while keeping enough meat to manage heat, and the Melonite finish protects it inside and out. A 1:10 twist handles the bullet weights most people feed a .308, from 147 grain plinking loads up through 168 and 175 grain match ammo.
Built Like a Saint Victor Should Be
Springfield didn't cut corners where it counts. The upper and lower are forged 7075-T6 aluminum with a Type III hardcoat anodized finish, and the Accu-Tite tension system keeps receiver fit snug instead of rattly. The bolt carrier group uses a 9310 steel bolt that's been HPT and MPI tested, built specifically for the higher pressures .308 dishes out. A taper-pinned low-profile gas block feeds the direct impingement system for consistent cycling, and the nickel boron coated flat trigger breaks clean without the grit you get from a standard GI setup.
Ready to Outfit Your Victor V2
The free-float aluminum handguard gives you a full-length Picatinny top rail plus plenty of M-LOK real estate for lights, bipods, or a hand stop, and Springfield's locking tabs keep it all anchored solid. Low-profile flip-up sights come installed and adjustable for windage and elevation, so you can shoot the rifle the day you bring it home, and built-in QD points make sling setup simple. An ambidextrous safety works for lefties and righties alike.
With a 10 round Magpul PMAG in the well, this is a natural fit for hog hunting, truck and ranch duty, or stretching steel at distance. It's a lot of .308 in a package that won't wear you out carrying it.
Key Specifications
- Manufacturer: Springfield Armory
- Model: Saint Victor V2
- Manufacturer Part Number: STV916308BCAV2
- UPC: 706397987121
- Caliber: .308 Win / 7.62 NATO
- Action: Semi-Auto, Direct Impingement
- Barrel: 16in 4150 CMV, Continuous Taper, Melonite Finish
- Twist Rate: 1:10
- Capacity: 10 + 1
- Overall Length: 38.5in
- Weight: 8.1 lbs (unloaded)
- Receivers: Forged 7075-T6 Aluminum, Type III Hardcoat Anodized
- Bolt Carrier Group: Enhanced .308 BCG, 9310 Steel Bolt, HPT/MPI Tested
- Handguard: Free-Float Aluminum, M-LOK, Full-Length Top Rail
- Trigger: Nickel Boron Coated Flat Trigger
- Sights: Low-Profile Adjustable Flip-Up Front and Rear
What’s Included
- Springfield Saint Victor V2 .308 rifle
- One 10-round Magpul PMAG
- Low-profile flip-up front and rear sights (installed)
- Padded rifle case with exterior magazine pouches
- Owner's manual
Frequently Asked Questions
What magazines does the Saint Victor V2 .308 accept?
It runs standard SR-25/DPMS pattern .308 magazines, which is the most common large-frame AR pattern out there. One 10-round Magpul PMAG ships with the rifle, and aftermarket options from Magpul and others are easy to find.
Is the 1:10 twist rate good for common .308 ammo?
Yes, 1:10 is a proven all-around twist for .308 Winchester. It stabilizes everything from 147 grain FMJ range ammo up through 168 and 175 grain match bullets, so you're covered whether you're plinking, hunting, or shooting for groups at distance.
How does the Saint Victor V2 handle compared to other AR-10s?
At 8.1 pounds unloaded with a 38.5 inch overall length, it's noticeably lighter and more compact than a lot of large-frame ARs. The continuous taper barrel profile keeps weight off the front end, so it balances well offhand and carries comfortably in the field.
Does the Saint Victor V2 come with sights and a case?
It does. Springfield includes low-profile flip-up front and rear sights that are adjustable for windage and elevation, plus a padded rifle case with interior straps and exterior magazine pouches. Between those and the included PMAG, you can head to the range the same day you pick it up.





Reviews
There are no reviews yet.