Description
Building an AR from the ground up gets a whole lot easier when the receiver and handguard are cut as a matched pair, and that's exactly what Radian did here. The Model 1 upper and 10-inch M-LOK handguard set arrives as one cohesive unit, machined from billet 7075-T6 aluminum and reinforced in the areas that take the most abuse. Radian gives everything a MIL-SPEC Type III hard anodize first, then coats the whole set in Radian Black Cerakote so the upper and rail wear the same deep, consistent black. It's the kind of fit and finish you notice the second you pull it out of the box.
What Sets the Model 1 Upper Apart
This isn't a bare receiver you'll be scrambling to complete. The set ships assembled with a dust cover, a lightweight forward assist, a handguard anti-rotation pin, and Radian's excellent Raptor-SD ambidextrous charging handle. The Raptor-SD is the piece that shooters tend to rave about most. Its ported shaft is designed to push gas down and forward, away from your face, which makes a real difference on suppressed builds where blowback can get miserable. The ambidextrous latches let you charge the gun with a palm blade or a finger-and-thumb grab from either side, gloves or not.
Handling the 10-Inch M-LOK Handguard
The free-float 10-inch rail is a great length for an SBR or pistol build, keeping things trim while still giving you plenty of real estate. You get M-LOK slots at the 3, 6, and 9 o'clock positions for lights, lasers, bipods, and hand stops, plus a continuous Picatinny top rail for optics and back-up irons. It mounts to the barrel nut with four steel cross bolts finished in black nitride to fight corrosion, and the anti-rotation pin keeps everything locked square. Every M-LOK slot and lightning cut is chamfered so there are no sharp edges digging into your support hand.
Getting Your Build Rolling
Radian includes the 7075-T6 barrel nut, a barrel nut wrench, and the full cross bolt hardware, so once you drop in a barrel, gas system, and BCG you're most of the way to a finished upper. At right around 1.41 pounds with the barrel nut, this set keeps weight in check without giving up rigidity. If you want a matched, premium base for your next multi-caliber build, this one delivers.
Key Specifications
- Manufacturer: Radian Weapons
- Model: Model 1
- Manufacturer Part Number: R0195
- UPC: 817093021368
- Product Type: Assembled Upper & Handguard Set
- Platform: AR-15
- Caliber: Multi-Caliber
- Handguard Length: 10 in
- Handguard Attachment: M-LOK (3, 6, 9 o'clock) with continuous Picatinny top rail
- Material: Billet 7075-T6 Aluminum
- Finish: MIL-SPEC Type III Hard Anodize with Radian Black Cerakote
- Charging Handle: Raptor-SD Ambidextrous
- Color: Black
- Weight (with barrel nut): 1.41 lbs
- Handguard Inner Diameter: 1.33 in (1.68 in w/ gas tube channel)
What’s Included
- 1x Billet upper receiver with dust cover, lightweight forward assist, and handguard anti-rotation pin
- 1x Raptor-SD ambidextrous charging handle
- 1x 10-inch handguard with Magpul M-LOK interface
- 1x 7075-T6 aluminum barrel nut
- 1x Barrel nut wrench
- 4x Handguard cross bolts, washers, and nuts
Frequently Asked Questions
Does the Radian Model 1 upper set come with a barrel or bolt carrier group?
No, this is the upper receiver and handguard portion of a build. It ships with the receiver, handguard, Raptor-SD charging handle, barrel nut, and mounting hardware, but you'll still need to add a barrel, gas system, and a bolt carrier group to complete the upper. Think of it as the matched foundation you build the rest of your rifle on.
Why does the Model 1 set include the Raptor-SD charging handle instead of a standard one?
The Raptor-SD has a ported shaft that redirects gas down and forward, away from your face. That's a big deal on suppressed builds where blowback tends to be worst, and this 10-inch set is a natural fit for SBR and pistol configurations that often run cans. You still get the full ambidextrous function for charging from either side.
What can I mount on the 10-inch handguard?
The handguard is free-float with M-LOK slots at the 3, 6, and 9 o'clock positions plus a continuous Picatinny top rail. That covers lights, lasers, bipods, hand stops, and pressure switches on the M-LOK slots, while the top rail handles optics and back-up iron sights. It gives you flexibility without adding a bunch of unnecessary rail weight.
Do the upper and handguard actually match in color?
Yes, and that's a big part of the appeal. Radian machines the two as a set, hard anodizes them, then sprays both in the same Radian Black Cerakote so the finish is uniform across the receiver and rail. No mismatched shades of black between the two pieces like you sometimes get mixing brands.





Reviews
There are no reviews yet.