Description
The HUB standard is one of the best things to happen to suppressors in years, and this mount is a perfect example of why. The Dead Air LT313 is a fixed direct thread insert that screws into the 1.375×24 HUB interface on the back of your can, giving you a clean, simple attachment for any host with 11/16×24 muzzle threads. That thread pitch shows up on plenty of big bore hosts and .45 caliber setups, and this little insert means you don't need a whole separate mounting system to run them suppressed.
Built Like the Rest of the Dead Air Lineup
Dead Air machines this mount from 4140 heat treated alloy steel and coats it in QPQ black nitride, the same no-nonsense recipe they use across their mount catalog. That combination shrugs off carbon, heat, and moisture, so it holds up to real use instead of looking pretty on a shelf. At 0.765 inches long and right around 1.92 ounces, it tucks almost entirely inside the suppressor, keeping your setup short and balanced instead of hanging extra hardware off the muzzle.
LT313 Compatibility Rundown
If your suppressor has the industry standard 1.375×24 HUB thread, this mount will work with it. That covers the Dead Air Nomad-30, Primal, Sierra-5, Lazarus-6, and Sandman-X, plus HUB cans from a long list of other manufacturers. It's part of Dead Air's full family of fixed thread inserts, so if you have hosts with different muzzle threads, you can keep a few pitches on hand and move one can across your whole safe.
Why Run a Direct Thread Mount
Direct thread is the simplest, most repeatable way to hang a suppressor, with no muzzle device to buy or time to the barrel. Spin the LT313 into your can, thread the whole package onto your 11/16×24 muzzle, and you're set. It's a small part that does exactly one job and does it well, which is about all you can ask of a mount.
Key Specifications
- Manufacturer: Dead Air Silencers
- Manufacturer Part Number: LT313
- UPC: 810128160360
- Model: HUB Direct Thread Mount
- Thread Pitch: 11/16×24
- Suppressor Interface: HUB compatible, 1.375×24
- Material: 4140 HT Alloy Steel
- Finish: QPQ Black Nitride
- Overall Length: 0.765 in
- Weight: 1.92 oz
- Color: Black
- Compatibility: Nomad-30, Primal, Sierra-5, Lazarus-6, Sandman-X and other HUB suppressors
- Product Type: Suppressor Accessory / Fixed Direct Thread Mount
What’s Included
- Dead Air HUB Direct Thread Mount, 11/16×24 (LT313)
Frequently Asked Questions
Will the LT313 work with suppressors from brands other than Dead Air?
Yes. The LT313 uses the industry standard 1.375×24 HUB thread on the suppressor side, so it works with just about any HUB-compatible can on the market, not just Dead Air models. If your suppressor accepts HUB mounts, this insert will thread right in.
How much length does the Dead Air HUB Direct Thread Mount add to my setup?
Very little. The mount measures 0.765 inches overall and most of that sits inside the suppressor body once installed. It weighs about 1.92 ounces, so it keeps your setup compact and doesn't throw off the balance of the host.
Which Dead Air suppressors does the LT313 fit?
It fits the Nomad-30, Primal, Sierra-5, Lazarus-6, Sandman-X, and any other Dead Air suppressor built on the 1.375×24 HUB interface. Just make sure your host's muzzle is threaded 11/16×24, since that's the pitch on the barrel side of this specific mount.
Do I need a shouldered barrel to use this direct thread mount?
You'll want a properly shouldered, concentric muzzle for the mount to index against, which is standard on quality threaded barrels. The mount torques against that shoulder to keep the suppressor aligned and secure. As with any direct thread setup, it's smart to check tightness periodically during long shooting sessions.





Reviews
There are no reviews yet.