Description
Anyone who has run a can hard knows the drill. A few magazines in and the heat coming off that suppressor turns your sight picture into a wavy mess. The Cole-Tac HTP Suppressor Cover exists to fix that. HTP stands for High Temperature Python, and it came about because Cole-Tac customers kept asking for a cover they could genuinely let loose on without babying it. The answer was a two-piece setup: a dedicated inner tube rated to 3000 degrees Fahrenheit wrapped inside the company's popular Metal Python outer shell.
What Makes the HTP Cover Different
Most budget covers either melt down under sustained fire or slide around on the can, which is arguably worse. The HTP handles both problems. The high-temp inner sleeve takes the direct heat off the suppressor body, while the Cordura outer shell cinches down with Cole-Tac's BOA retention system so the whole assembly stays locked in place through recoil and rapid strings. Owners running it on precision bolt guns report the cover holding steady under recoil, and even after fifty back-to-back rounds from a 6.5 Creedmoor the can stayed handleable with no visible mirage. It also means you can grab your suppressor to swap or stow it without waiting around for things to cool off.
Fit and Sizing for the 6 Inch HTP
This version is built for suppressors around 6 inches long and fits cans in the 1 to 2 inch diameter range, which covers a huge chunk of the rimfire, pistol caliber, and rifle suppressors out there. The coyote brown color plays nice with earth-tone builds and camo stocks, and at roughly 5 ounces it adds very little to the end of your rifle. If you shoot suppressed with any regularity, whether that's a precision rifle behind glass or an AR you train with, this is one of those accessories that earns its spot fast. Plenty of folks who started with the standard Python cover step up to the HTP and never look back.
Key Specifications
- Manufacturer: Cole-TAC
- Model: HTP (High Temperature Python)
- Manufacturer Part Number: HTP102
- UPC: 638362939883
- Cover Length: 6"
- Fits Suppressor Diameter: 1" to 2"
- Color: Coyote Brown
- Inner Tube Heat Rating: 3000°F
- Outer Shell: Metal Python cover with BOA retention
- Outer Material: Cordura nylon
- Weight: Approx. 5 oz
- Construction: Two-piece, inner tube plus outer shell
What’s Included
- HTP high-temperature inner tube
- Metal Python outer shell with BOA retention
Frequently Asked Questions
What suppressors will the 6 inch Cole-Tac HTP cover fit?
This version is sized for suppressors around 6 inches in length with a body diameter between 1 and 2 inches. That range covers most rimfire, pistol caliber, and a good number of compact rifle cans. If your suppressor runs a little longer, a small section may stick out past the cover, so measure your can before ordering.
How is the HTP different from the standard Cole-Tac Python cover?
The HTP adds a dedicated inner tube rated to 3000 degrees Fahrenheit underneath the same Metal Python outer shell. That extra layer is what lets it handle high round counts and sustained fire that would cook a standard single-layer cover. It was designed specifically for people who wanted a cover they could run hard without worrying about it.
Will the HTP suppressor cover slip or rotate on the can when shooting?
The BOA retention system on the outer shell cinches the cover down tight so it stays in place through recoil and rapid fire. Users running it on everything from 6.5 Creedmoor bolt guns to hard-use ARs report it holding position well. Getting it snugged down properly during install is the key to keeping it planted.
Does a suppressor cover like the HTP really reduce mirage?
Yes, and it matters more than people expect. A hot suppressor throws heat waves directly into your line of sight, especially behind magnified optics, and that shimmer can make precise shots frustrating. The HTP's insulated layers trap that heat against the can instead of letting it boil up into your sight picture, and it also lets you handle the suppressor sooner after shooting.







Reviews
There are no reviews yet.