Description
There are ARs you buy because they get the job done, and then there is the Radian Model 1. Radian machines the upper, lower, and handguard from billet 7075 aluminum and Cerakotes all three together as a set, so the Olive Drab Green finish matches from end to end instead of looking like three parts from three different batches. Each rifle is put together by hand by a trained gunsmith who inspects it, test fires it, and cleans it before boxing it up. That level of attention shows the second you pick one up.
A Barrel Built for Real Accuracy
The 14.5 inch match grade 416R stainless steel barrel is chambered in .223 Wylde, the hybrid chamber that shoots both 5.56 NATO and .223 Remington with match level precision. A Dead Air flash hider and suppressor mount comes pinned and welded to bring the overall length to 16 inches, so you get the handy balance of a shorter barrel with a can-ready muzzle device already in place. The mid-length gas system keeps recoil smooth, and the polished crown and feed ramps are the kind of small touches that separate this rifle from the pack.
Ambidextrous From the Ground Up
Left-handed shooters usually get an afterthought. Not here. The Model 1 runs Radian's Talon 45/90 ambidextrous safety selector, the Raptor-SD suppressor-optimized ambi charging handle, and the patented A-DAC dual action catch with magazine and bolt releases on both sides. Right-handed users can even lock the bolt back without breaking their firing grip. It is one of the most genuinely ambidextrous ARs on the market.
Rounding Out the Radian Model 1
A 14 inch free float M-LOK handguard with an integrated anti-rotation pin gives you plenty of room for lights, grips, and hand position, while Magpul furniture and a two-stage match trigger finish the build. The flat-top upper ships optic ready, so you pick the glass. Radian backs every Model 1 with a lifetime guarantee, and it feeds from a 30 round magazine for a 30+1 capacity.
Key Specifications
- Manufacturer: Radian Weapons
- Model: Model 1
- MPN: R0536
- UPC: 817093028268
- Action: Semi-Auto
- Caliber: .223 Wylde (accepts 5.56 NATO and .223 Rem)
- Barrel: 14.5" match grade 416R stainless steel, pinned and welded to 16" OAL
- Muzzle Device: Dead Air flash hider / suppressor mount
- Gas System: Mid-length
- Handguard: 14" free float aluminum with M-LOK slots
- Receivers: Billet machined 7075 aluminum
- Charging Handle: Radian Raptor-SD ambidextrous
- Safety: Radian Talon modular ambidextrous 45/90 selector
- Capacity: 30+1
- Finish: Olive Drab Green Cerakote, matched receiver and handguard set
- Weight: 6.14 lbs
What’s Included
- Radian Model 1 carbine
- One 30-round magazine
- Owner's manual
Frequently Asked Questions
Can the Radian Model 1 shoot both 5.56 NATO and .223 Remington?
Yes. The .223 Wylde chamber is a hybrid design built to safely run 5.56 NATO pressures while holding the tighter tolerances that make .223 Remington shoot accurately. With the 1:8 twist barrel, it handles a wide range of bullet weights and really shines with heavier 69 to 77 grain match loads.
Is the Model 1 a good choice for left-handed users?
It is one of the best out there. The controls are fully ambidextrous, including the Talon 45/90 safety selector, Raptor-SD charging handle, and mag and bolt releases on both sides of the receiver. Radian's A-DAC system even lets you lock the bolt to the rear without shifting your grip.
Is the Radian Model 1 suppressor ready?
Very much so. The 14.5 inch barrel comes with a Dead Air flash hider pinned and welded in place, and that device doubles as a mount for Dead Air suppressors. The Raptor-SD charging handle is also designed to reduce gas blowback to your face when shooting suppressed.
Does the Radian Model 1 come with sights or an optic?
No, it ships optic ready with a bare flat-top rail. That gives you a clean slate to mount a red dot, LPVO, or whatever glass fits how you plan to run the rifle. Given the match grade barrel, most owners pair it with quality optics to get the accuracy it is capable of.





Reviews
There are no reviews yet.