0
0

KRISS Vector SDP-E G2 10mm Pistol 6.5″ Threaded Barrel Black

UPC: 811607033564

$1,339.99

12 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The 10mm Auto is one of those cartridges that always made sense on paper but was hard to tame in practice. KRISS built the Vector around solving exactly that problem. At the core of the SDP-E G2 is the Super V Recoil Mitigation System, a closed-bolt delayed-blowback design where a low-mass slider travels perpendicular to the barrel, driving recoil energy downward rather than back into your hands. Paired with what KRISS claims is the lowest bore axis of any firearm in the world, the barrel sits in line with the second knuckle of the shooting hand, giving you a real mechanical advantage over muzzle flip. The result with 10mm is a surprisingly flat-shooting platform, especially on quick follow-up shots where conventional pistols would have you chasing the sights back down.

What Makes the Vector SDP-E G2 Different in 10mm

The SDP-E is the Enhanced variant of the Special Duty Pistol line, which means it gets the MK5M modular rail system up front. That's a full 12-slot bottom Picatinny rail with M-LOK slots at every 45-degree angle, so you're not limited in how you hang a light, laser, or foregrip. The 6.5" barrel is machined from 4140 chrome-moly steel with a black nitride finish and threaded at 9/16×24 RH for suppressor or muzzle device attachment. The flip-up front and rear sights fold completely flat when you mount an optic on the full-length top rail, and they co-witness cleanly when you need them back up. Ambidextrous controls including the short-throw thumb safety are positioned where your thumb naturally falls, and the non-reciprocating charging handle stays out of the way during firing.

Glock Magazine Compatibility and Fieldstrip

Like every Vector in the lineup, this one feeds from full-size Glock-pattern magazines. If you've already got a G20 or G40 on your hip, you're sharing the same feeding device, which is a practical advantage that's hard to overstate. The 33+1 capacity figure referenced comes from optional extended KRISS MAGEX2 units that accept a standard Glock 10mm magazine as the base; the gun ships with one 15-round magazine. Fieldstripping requires nothing more than removing four takedown pins, no tools needed, which makes cleaning and maintenance straightforward even in the field. The polymer frame is reinforced with advanced metal components throughout, keeping weight in check while maintaining structural integrity under the load of regular 10mm use.

For the range shooter or home-defense minded buyer who wants genuine 10mm performance without getting punished every time they press the trigger, the Vector SDP-E G2 is a serious option. The threaded barrel and full rail system mean it's also a natural candidate for a suppressor build, and the platform's deep aftermarket keeps it highly configurable well beyond what's in the box.

Key Specifications

  • Manufacturer: KRISS USA (Kriss TDI)
  • MPN: KV10PBL30
  • UPC: 811607033564
  • Caliber: 10mm Auto
  • Action: Semi-Auto, Closed Bolt Delayed Blowback
  • Barrel Length: 6.5"
  • Barrel Material: 4140 Chrome-Moly Steel, Black Nitride Finish
  • Thread Pattern: 9/16" x 24 RH
  • Overall Length: 16.75 in / 425 mm
  • Overall Height: 6.8 in / 175 mm
  • Weight (Unloaded): 5.9 lbs / 2.7 kg
  • Capacity: 15+1 (33+1 with optional MAGEX2 extension)
  • Magazine Compatibility: Full-Size Glock-Pattern Magazines
  • Sights: Flip-Up Front & Rear (Adjustable)
  • Rail System: Full-Length Picatinny Top Rail; MK5M Modular Bottom Rail
  • Frame: Advanced Polymer Composite with Metal Components
  • Finish: Matte Black
  • ATF Classification: Pistol

What’s Included

  • KRISS Vector SDP-E G2 10mm Pistol
  • 1x 15-round Glock-pattern magazine
  • Cleaning kit
  • Cable lock
  • Owner's manual
  • Warranty card

Frequently Asked Questions

Does the KRISS Vector SDP-E G2 10mm actually reduce felt recoil compared to a standard pistol?

Yes, and the difference is real enough that most people who shoot it back-to-back with a conventional 10mm pistol notice it immediately. The Super V system redirects the blowback energy downward using a low-mass slider that travels perpendicular to the barrel, which acts as a counterweight against muzzle rise rather than adding to it. Combined with the Vector's extremely low bore axis, rapid follow-up shots stay on target in a way that's difficult to achieve with a traditional 10mm handgun. Reviews consistently describe it as feeling more like shooting a milder cartridge than a near-magnum round.

What magazines does the KRISS Vector SDP-E G2 10mm use?

It accepts standard full-size Glock-pattern 10mm magazines, specifically those designed for the Glock 20 and G20SF. This is a significant practical advantage if you already own a G20 or G40, since you're running the same magazines across both guns. KRISS also makes the MAGEX2 extension kit that attaches to a standard Glock 10mm magazine base to bring capacity up to 33 rounds. The pistol ships with one 15-round magazine.

What is the thread pattern on the 6.5" barrel, and what suppressors are compatible?

The barrel on the SDP-E G2 10mm is threaded at 9/16×24 RH, which is the standard thread pitch used by most .40 S&W and larger bore suppressors. Because the Vector uses a fixed barrel, it's an excellent host for direct-thread suppressors, and KRISS specifically recommends using suppressors designed for fixed barrels or those with a fixed barrel spacer. If you're planning a suppressed build, verify with your suppressor manufacturer that their can supports 10mm and is indexed against the muzzle rather than the shoulder.

Can the KRISS Vector SDP-E G2 be converted to an SBR?

Yes. The rear pistol cap on the SDP features a QD flush cup sling swivel mount that can be removed and replaced with a folding or telescoping shoulder stock to register the firearm as a short-barreled rifle with the ATF. The Vector platform is designed with modularity in mind, and KRISS as well as several aftermarket companies make stock adapters and accessory kits for exactly this type of conversion. Just keep in mind that SBR registration requires a Form 1 approval before making any changes to the configuration.

How does the KRISS Vector SDP-E G2 field strip for cleaning?

Field stripping the Vector is tool-free and fairly intuitive once you've done it once. You simply remove four takedown pins to separate the major components: the upper receiver, lower receiver, barrel, and bolt assembly. No punches, no blocks, no special tools required. Reassembly is just as straightforward, and most owners find the process quick after a couple of times through it.

What optics can I mount on the KRISS Vector SDP-E G2 10mm?

The full-length Picatinny top rail runs the entire length of the upper receiver, giving you plenty of real estate for red dots, holographic sights, or low-power variable optics. Standard footprint sights like the Holosun 510C, SIG Romeo series, and Trijicon MRO all mount up without issue. The flip-up iron sights fold completely flat when an optic is in place and can co-witness if you prefer to run them up alongside a raised red dot.

Additional information

UPC

811607033564

Manufacturer

Manufacturer Part Number

KV10PBL30

Action

ATF Type

Pistol

Barrel Length

6.5"

Caliber/Gauge

10mm

Capacity

33 + 1

Color

Black

Length

32

Model

Number of Magazines

1

Package Height

3.8

Package Width

11.9

Product Type

Pistol

Safety

Ambidextrous

Shipping Weight

11.4

Sights

Flip Up Front & Rear

Sights Type

Adjustable Sights

State Restriction (CA)

NO DIRECT SHIP TO CALIFORNIA

State Restriction (IL)

NO SALE TO ILLINOIS PICA

State Restriction (OR)

NO SALE TO OREGON

State Restriction (RI)

NO DIRECT SHIP TO RHODE ISLAND

State Restriction (WA)

NO DIRECT SHIP TO WASHINGTON

Units per Box

1

Reviews

There are no reviews yet.

Be the first to review “KRISS Vector SDP-E G2 10mm Pistol 6.5″ Threaded Barrel Black”