Description
When your primary optic goes down or the battery dies at the worst possible moment, the Magpul MBUS Pro Rear Sight is the piece that keeps you in the fight. This is the steel version of Magpul's back-up line, machined from all-steel stock rather than polymer, then case hardened and finished with a Melonite QPQ salt bath nitride process for serious resistance to wear and corrosion. It mounts to any MIL-STD-1913 Picatinny or STANAG 4694 rail, including receiver-height gas blocks, so it plays nice with pretty much any modern AR setup.
What Sets the MBUS Pro Rear Apart
The standout feature is the dual aperture setup. You get a wide aperture at 0.19 inches for fast, close-range or low-light target acquisition, and a narrow 0.07 inch aperture for stretching things out and dialing in precision at distance. Flipping between the two is quick and secure thanks to positive detents that lock the aperture window in place. Windage adjustment happens through a low-profile knob with no tools required, running roughly 0.5 MOA per click on a 14.5 inch sight radius or about 0.4 MOA on a 20 inch radius, which is plenty fine for getting a solid zero.
How the MBUS Pro Rear Handles Real Use
Deployed, it sits at standard AR sight height of 1.41 inches over the rail, so it co-witnesses cleanly and lines up with a matching front sight without any guesswork. Stowed, it drops down to right around 0.37 inches, low enough that it disappears under most red dots and magnified optics and won't snag on gear. Detents hold it firm whether it's up or down, which means it stays put and keeps your zero through recoil and hard handling. It weighs about 1.8 ounces with hardware, so you're adding real steel durability without much penalty.
Made in the USA, the MBUS Pro Rear pairs naturally with the MBUS Pro front sight for a complete iron sight system, and it's a smart insurance policy for any rifle you actually depend on.
Key Specifications
- Manufacturer: Magpul Industries
- Manufacturer Part Number: MAG276-BLK
- UPC: 873750008387
- Model: MBUS Pro
- Color: Black
- Construction: All-steel, case hardened with Melonite QPQ finish
- Type: Rear Folding / Flip-Up Back-Up Sight
- Rail Compatibility: MIL-STD-1913 Picatinny / STANAG 4694
- Adjustment: Tool-less windage, low-profile knob
- Windage Value: ~0.5 MOA/click at 14.5 in radius; ~0.4 MOA/click at 20 in radius
- Large Aperture Diameter: 0.19 in
- Small Aperture Diameter: 0.07 in
- Aperture Height Over Rail (Deployed): 1.41 in
- Height Stowed: ~0.37 in
- Length Stowed: 2.1 in
- Weight (with hardware): 1.8 oz
What’s Included
- Magpul MBUS Pro Rear Sight (steel, black)
- Mounting hardware
Frequently Asked Questions
Does the MBUS Pro Rear Sight co-witness with a red dot?
Yes. When deployed it sits at standard AR sight height of 1.41 inches over the rail, so it lines up cleanly for co-witnessing under most red dot optics. Stowed, it folds down to about 0.37 inches and drops below the sight window so it stays out of your view until you flip it up.
What's the difference between the MBUS Pro and the standard MBUS?
The standard MBUS uses Magpul's impact-resistant polymer, while this MBUS Pro is built from all-steel and finished with Melonite QPQ for extra durability and corrosion resistance. The Pro also runs a lower profile when stowed. If you want the toughest option and don't mind the slight added weight, the Pro is the way to go.
Can I adjust the MBUS Pro Rear Sight without tools?
You can. Windage adjustments are made with a low-profile knob that requires no tools, so you can zero it in the field. Each click runs roughly 0.5 MOA on a 14.5 inch sight radius, giving you fine control for dialing things in.
What does the dual aperture on the MBUS Pro Rear do?
You get two aperture sizes: a wide 0.19 inch opening for fast, close-range and low-light shooting, and a narrow 0.07 inch aperture for more precise aiming at distance. You flip between them quickly, and positive detents keep whichever one you've selected locked in place.





Reviews
There are no reviews yet.