Description
Backup iron sights have looked pretty much the same for a long time, and the Ultradyne C4 is the one that finally does something different. Instead of stacking a square post inside a peep, the C4 uses a front sight with a circular opening cut through it that lines up inside the rear aperture. Your eye naturally wants to center circles, so you get on target faster and, better yet, you can see what you're aiming at instead of blotting it out with a post. Ultradyne calls this Dynalign, and it borrows from the concentric sighting systems Olympic shooters have used for years.
What Sets the C4 Combo Apart
Both the front and rear sights carry their own windage and elevation adjustments, which is a big deal. You zero windage on the front so the rear stays perfectly centered, leaving you the full range of rear adjustment in either direction. The rear sight runs a ballistically calibrated elevation cam with 50-yard BDC clicks from 200 out to 600 yards, so holding for distance is a matter of dialing rather than guesswork. Elevation on the front is tool-less, and the front aperture also cuts down on parallax, so tight sight alignment matters a little less when things get quick.
Built to Take a Beating
These are made from 4140 CrMo steel with a salt bath nitride finish and 7075 aerospace alloy that's hard anodized, so they're built to hold up. The front sight ships with a 12 MOA Dynalign post, with 8, 10, and 14 MOA options available if you want to fine-tune the ring size. The rear comes with a 0.070-inch aperture, and the spare threads right into the windage knob so you never lose it. Both deploy and stow one-handed using a positive detent, so they stay locked up while you shoot.
Fitting the C4 to Your Setup
The C4 mounts to any Mil-Std 1913 Picatinny rail and folds down compact, standing just .369 inches tall when stowed, so it plays nice under a magnified optic, red dot, or thermal. It's a natural fit for an AR-15 or LR-308 build, whether you're running them as your primary irons or as a serious backup behind glass.
Key Specifications
- Manufacturer: Ultradyne USA
- Model: C4
- MPN: UD10480
- UPC: 851019008088
- Color: Black
- Style: Flip-Up / Folding
- Mounting: Mil-Std 1913 Picatinny Rail
- Front Sight Aperture: 12 MOA Dynalign (8, 10, 14 MOA available)
- Front Windage: 40 MOA Total, 1/2 MOA per click
- Front Elevation: 28 MOA Total, tool-less
- Rear Aperture: 0.070 in included (0.050 in available)
- Rear Windage: 40 MOA Total, 1/2 MOA per click
- Rear Elevation: 18 MOA Total, 50-yard BDC to 600 yards
- Material: 4140 CrMo Steel, 7075 Aerospace Alloy
- Finish: Salt Bath Nitride / Hard Anodized
- Stowed Height: 0.369 in
What’s Included
- C4 Folding Front Sight with 12 MOA Dynalign post
- C4 Folding Rear Sight
- 0.070-inch rear aperture (installed)
- Spare rear aperture (stows in windage knob)
Frequently Asked Questions
How is the Ultradyne C4 different from regular backup iron sights?
Traditional irons ask you to center a square post inside a rear peep, which covers up part of your target. The C4 uses a front sight with a circular opening that lines up inside the rear aperture, creating a circle-within-circle picture Ultradyne calls Dynalign. Your eye centers circles naturally, so you acquire the target faster and can actually see it instead of blocking it out.
Does the C4 combo work on an AR-15 and LR-308?
Yes. The C4 mounts to any Mil-Std 1913 Picatinny rail, which makes it a straightforward fit for AR-15 rifles in 5.56 as well as LR-308 platforms. As long as you've got flat-top rail space, you're good to go.
How does the rear sight handle holdovers at distance?
The C4 rear sight has a ballistically calibrated elevation cam with BDC clicks in 50-yard increments from 200 out to 600 yards. That lets you dial for range instead of guessing at a holdover. It's worth noting that shooting irons past 300 yards takes a bit more skill than a magnified scope, but the calibrated adjustments make it far more repeatable.
Are the C4 sights spring-assisted flip-ups?
No, they don't spring up on their own. The C4 uses a positive detent, so you deploy and stow them one-handed by manually flipping them into position. Once they're up, the detent keeps them locked in place while you shoot.





Reviews
There are no reviews yet.