$132.30
7 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
ZEV built its name on Glock trigger upgrades, and the PRO Flat Face Trigger Bar Kit is the small-frame version of that work in a black finish with a red safety accent. At the heart of it sits ZEV's own trigger bar paired with the PRO connector, the two pieces responsible for turning a stock Glock pull into something cleaner. The flat trigger pad rides more naturally on your finger than the curved factory shoe, giving you better leverage and a more consistent point of contact shot to shot.
This is a component-level kit, meaning you get the trigger with the flat-faced riveted pad, the ZEV trigger bar, and the PRO connector. You reuse your factory trigger housing, ejector, and springs during the swap. Folks running this setup routinely report their pull weight dropping from the factory 6-pound range down to right around 3 pounds, along with a shorter, more positive reset. That kind of change is a big deal whether you're chasing splits on the range or just want a trigger that breaks predictably.
The small designation covers the 9mm, .40 S&W, and .357 SIG frame footprint across Glock Gen 1 through Gen 4. That includes popular models like the 17, 17L, 19, 22, 23, 26, 27, 31, 32, 33, and 34. If you're running a Gen 5 or a slimline single-stack, this isn't the right kit, so double-check your generation before ordering.
Most people find the install straightforward with basic punches and a little patience, and plenty describe it as easier than expected. The riveted trigger pad is a durability upgrade over glued designs, so it holds up to long-term round counts. Take your time seating the connector correctly and function-check the trigger and safety reset thoroughly before heading out to shoot.
This is a component-level kit that includes the flat-faced trigger, the ZEV trigger bar, and the PRO connector. You reuse your factory trigger housing, ejector, and springs to complete the swap. If you want a fully assembled system that just drops in, ZEV offers complete kits as a separate option.
It fits small-frame Glock models in Gen 1 through Gen 4, including the 17, 17L, 19, 22, 23, 26, 27, 31, 32, 33, and 34 chambered in 9mm, .40 S&W, and .357 SIG. It is not designed for Gen 5 pistols or the slimline single-stack models. Confirm your model and generation before ordering to make sure it's a match.
Users commonly report their pull dropping from the factory 6-pound range down to about 3 pounds after installing the kit. Along with the lighter pull, you get a crisper break and a shorter, more positive reset. Actual results can vary slightly depending on your springs and how you build the assembly.
Many people prefer the flat face because it sits more naturally on the finger and gives more consistent contact and leverage shot to shot. The red safety blade is also often described as more comfortable than the OEM piece. It comes down to personal feel, but flat-face triggers are popular with both range and carry setups.
| UPC | 811338032492 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | FFT-PRO-BAR-SM-B-R |
| Shipping Weight | 0.15 |
You must be logged in to post a review.
Reviews
There are no reviews yet.