Description
ZEV pretty much built the aftermarket Glock trigger scene, and the Pro Flat Face Bar Kit is a big reason why. If your Gen5 feels gritty, heavy, or just plain inconsistent from shot to shot, this is the fix a lot of folks reach for. The flat trigger face gives your finger a consistent contact point every single pull, which translates to better trigger control and tighter groups downrange. Out of the box you're looking at a noticeable drop in pull weight, with plenty of owners reporting their guns landing somewhere in the 3.5 to 4.5 pound range depending on setup, down from a factory pull that usually sits north of 6 pounds.
What Makes the ZEV Pro Flat Face Bar Kit Tick
The whole thing revolves around ZEV's proprietary trigger bar working with the included PRO connector. The trigger pad itself is machined from mil-spec hard-anodized aluminum and uses a riveted assembly rather than a pinned shoe, which is a big part of why these hold up round after round. The take-up smooths out, the wall feels defined, and the break is clean without any of that stacking or mush you get from the stock unit. The black shoe with the red safety blade also just looks right in a Gen5 frame.
Fitment for Your Gen5 Glock
This kit is built for Gen5 pistols and covers the Glock 17, 19, 19X, 26, 34, and 45 in 9mm. It's a component-level swap that replaces your factory trigger bar, so you keep the fundamentals of the gun intact while completely changing the feel.
Installing the ZEV Pro Kit
Installation is a straightforward drop-in for anyone comfortable working inside a Glock, and there are plenty of walkthrough videos to follow along with. That said, this is fire control, so take your time and always function check afterward. Confirm the trigger safety and firing pin safety fully reset before you load a single round. If you're not confident pulling apart your Glock, a gunsmith can knock this out in a few minutes.
Key Specifications
- Manufacturer: ZEV Technologies
- Model: Pro Flat Face
- Manufacturer Part Number: FFT-PRO-BAR-5G-B-R
- UPC: 811338032676
- Trigger Shape: Flat Face
- Finish/Color: Black Shoe / Red Safety
- Material: Mil-Spec Hard-Anodized Aluminum
- Fits: Glock 17, 19, 19X, 26, 34, 45 Gen5
- Caliber: 9mm
- Connector: ZEV PRO Connector Included
- Advertised Pull Weight: Approx. 3.5 lbs
- Shipping Weight: 0.145 lbs
What’s Included
- ZEV PRO Flat Face riveted trigger shoe with red safety
- ZEV proprietary Gen5 trigger bar
- ZEV PRO connector
Frequently Asked Questions
Which Glock models does the ZEV Pro Flat Face Bar Kit fit?
This kit is made for Gen5 pistols and fits the Glock 17, 19, 19X, 26, 34, and 45 in 9mm. It replaces your factory trigger bar and connector as a matched set. If your Glock is an earlier generation, you'll want the Gen1-4 version instead.
How much lighter is the trigger pull after installing this kit?
ZEV advertises the setup around 3.5 pounds, and real-world results tend to land in the 3.5 to 4.5 pound range depending on your specific pistol and springs. That's a solid drop from a factory Gen5 pull that usually sits above 6 pounds. Some owners go even lighter by pairing it with a lighter plunger or striker spring.
Is the ZEV Pro Flat Face trigger a drop-in install?
Yes, it's a drop-in swap for anyone comfortable disassembling a Glock, and it comes with the trigger bar and PRO connector so you're not sourcing extra parts. Plan on a bit of patience the first time and follow a good walkthrough video. Since this is fire control, always run a full function check and confirm both safeties reset before loading.
What's the difference between the flat face and the curved ZEV Pro trigger?
The flat face gives you a consistent finger contact point and a slightly different leverage feel that many shooters find helps with trigger control and follow-through. The curved version mimics the factory Glock profile more closely. It really comes down to personal preference, so go with whichever feels more natural under your finger.





Reviews
There are no reviews yet.