$132.30
5 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
ZEV pretty much started the aftermarket Glock trigger game, and the Pro Flat Face Bar Kit is what that experience looks like once they went back and rebuilt the whole thing from scratch. The heart of this kit is a proprietary trigger bar paired with a Pro connector, and the trigger pad itself uses a riveted assembly instead of glue or pins so it holds up round after round. It's machined from Mil-Spec hard-anodized aluminum in a clean black-on-black finish that disappears into the frame.
What you feel at the range is the real story. The flat face gives your finger a wider, flatter surface to press straight back, which cuts down on the sideways drift that curved triggers can cause. Real-world testing has shown pull weights dropping from around six pounds on a stock Glock down into the low-three-pound range, with a smooth take-up, a defined wall, and a break that's crisp without being glassy. That last part matters for anyone carrying, since you want a lighter trigger that still feels predictable rather than hair-triggered.
This is a bar-level kit, so you're reusing your factory trigger housing, ejector, and spring while dropping in the ZEV trigger, bar, and connector. Most folks knock the install out in well under an hour once the slide's off, and there are plenty of walkthrough videos if it's your first time inside a Glock. If you're not comfortable working on the fire control group, any gunsmith can handle it quickly.
The kit is built for Gen5 pistols and fits the Glock 17, 19, 19X, 26, 34, and 45 chambered in 9mm. It's a favorite among competition and defensive users alike, and ZEV backs it with a reputation for quality and consistency that's earned it a spot in a lot of serious shooters' guns. Made in the USA.
It's designed for Gen5 pistols and fits the Glock 17, 19, 19X, 26, 34, and 45 in 9mm. Make sure your pistol is a Gen5, since Gen1-4 models use a different bar and connector. Always confirm your generation before ordering so you get the right parts.
ZEV doesn't publish a fixed number but describes it as roughly a 15% reduction over stock. In real-world testing users have measured pulls dropping from around six pounds down into the low-three to mid-four pound range depending on setup. Adding a lighter trigger or plunger spring can bring it down further if you want.
This is a bar-level kit, meaning it includes the trigger pad, trigger bar, and Pro connector. You'll reuse your factory trigger housing, ejector, and spring during the swap. If you'd rather have a fully assembled unit that just drops in, ZEV also offers complete kits.
Most people find it straightforward and get it done in well under an hour with basic punches and a little patience. There are plenty of walkthrough videos for working inside a Gen5 Glock. If you're not comfortable with the fire control group, a gunsmith can install it quickly.
| UPC | 811338032669 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | FFT-PRO-BAR-5G-B-B |
| Shipping Weight | 0.145 |
You must be logged in to post a review.
Reviews
There are no reviews yet.