$649.00
8 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Proof Research's Zermatt Arms pre-fit takes one of the most popular precision cartridges going, the 6mm Dasher, and puts it within reach of anyone running an Origin or Aero Precision SOLUS action. This is a shouldered pre-fit, which means there's no barrel nut and no lathe work. You spin off the old barrel, thread this one on, torque it down, verify headspace, and you're headed to the range. It comes chambered, threaded, and headspaced from the factory, so the guesswork that usually comes with a barrel swap is already handled.
The 6 Dasher has earned its reputation in PRS and benchrest circles for flat trajectories, low recoil, and stellar barrel life relative to the performance it puts on paper. This barrel measures 26 inches in a competition contour with a 1-7.5 twist and a 5/8×24 muzzle thread, so it's ready for your brake or suppressor of choice. That fast twist is dialed in for the heavier 105 to 110 grain 6mm match bullets that make the Dasher sing. Finished weight lands right around 7 pounds 5 ounces.
Proof cuts these steel barrels in-house using the same drilling, rifling, and lapping process they run on their carbon fiber line. They start with double stress-relieved 416R stainless, a pre-hardened chromium stainless steel chosen for its consistency, machinability, and ability to hold up to serious round counts. The result is a barrel that arrives ready to shoot and behaves predictably load after load.
Shooters running these Dasher pre-fits report tight groups right out of break-in, with several noting sub-half-inch performance and impressive velocity consistency once their loads settle in. If you've been thinking about building a Dasher without tying up your rifle at the gunsmith for weeks, this is about as straightforward as a caliber change gets.
This barrel is cut for the Zermatt Arms Origin action, and it's also compatible with the Aero Precision SOLUS since that action shares the Origin's thread and interface. Because it's a shouldered pre-fit, it threads directly onto your action with no barrel nut required. Always confirm your action type and length before ordering, since pre-fits are specific to the action they're built for.
No lathe or full gunsmith fitting is needed. These shouldered pre-fits arrive chambered, threaded, and headspaced, so you spin off the old barrel with a barrel vise and action wrench, thread this one on, torque it to spec, and double check headspace. It's one of the simplest ways to change calibers or refresh a shot-out barrel at home.
The 1-7.5 twist is optimized to stabilize the heavier 6mm match bullets, generally in the 105 to 110 grain range, that shooters run in the Dasher for competition. That fast twist keeps those high-BC projectiles spinning true for tight groups and flat wind performance. It's the right pairing for PRS, NRL, and benchrest use.
Proof cuts these stainless barrels in-house to the same match-grade standard as their carbon fiber line, using double stress-relieved 416R steel. Feedback from shooters running these Dasher pre-fits points to sub-half-inch groups after a proper break-in, with strong velocity consistency once a load is dialed. As always, your results will depend on your load development and the rest of your rifle setup.
| UPC | 843068121542 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 121542 |
| Length | 26'' |
| Model |
You must be logged in to post a review.
Reviews
There are no reviews yet.