Description
The Zaffiri Precision ZP.HCBBN is built for folks who want their Springfield Hellcat to shoot a little tighter without changing the size or feel of their carry gun. It's a match-grade drop-in barrel machined from 416R stainless steel, stress relieved and heat treated to a Rockwell hardness of 40-42, then coated in black nitride for a slick, hard-wearing surface. The flush-and-crown design sits even with the end of the slide with an inward crown shape, so your Hellcat keeps its short, snag-free profile.
What Sets the ZP.HCBBN Apart
Where this barrel earns its keep is the machining. It runs a 1:10 twist and an oversized lockup area that seats tighter against the slide than a factory barrel, which is where a lot of the accuracy gains come from. The recessed target crown protects the rifling at the muzzle and helps keep groups consistent, and there's a large ZP logo machined into the port side of the lockup for a bit of custom flair. It's made in the USA.
Feeding and Ammo Notes for the Hellcat Barrel
The feed ramp comes polished from the factory, which smooths out the transition from magazine to chamber and helps things run reliably. It's rated to work with lead, plated, or jacketed ammunition, so you're not locked into one type of range fodder. The non-threaded 3.05 inch length is sized for the standard Hellcat micro-compact and will be too short for the Hellcat Pro, so double-check which model you're running before ordering.
Installation is about as simple as it gets. Field strip your Hellcat, swap the factory barrel for the Zaffiri, and reassemble. It drops right in with no fitting or gunsmithing, making it an easy weekend upgrade for a daily carry gun or a range pistol you want shooting its best.
Key Specifications
- Manufacturer: Zaffiri Precision
- Manufacturer Part Number: ZP.HCBBN
- UPC: 658792272046
- Fits: Springfield Hellcat (Micro-Compact)
- Caliber: 9mm
- Barrel Length: 3.05 inches
- Style: Non-Threaded, Flush and Crown
- Twist Rate: 1:10
- Material: 416R Stainless Steel
- Finish: Black Nitride
- Hardness: Stress relieved, heat treated to RC 40-42
- Ammunition: Lead, plated, or jacketed
- Country of Origin: Made in USA
What’s Included
- Zaffiri Precision ZP.HCBBN Hellcat drop-in barrel
Frequently Asked Questions
Will this Zaffiri Precision barrel fit my Hellcat Pro?
No. This 3.05 inch barrel is sized for the standard Springfield Hellcat micro-compact and will be too short for the Hellcat Pro. Zaffiri makes a separate Hellcat Pro barrel if that's the model you're running, so confirm your pistol before ordering.
Do I need a gunsmith to install the ZP.HCBBN?
Not at all. It's a true drop-in barrel, so you field strip the Hellcat, remove the factory barrel, drop in the Zaffiri, and reassemble. No fitting or gunsmithing required, which makes it an easy at-home swap.
What kind of ammo can I run through it?
This barrel is made to work with lead, plated, or jacketed ammunition, so it handles typical range and defensive loads. The polished feed ramp helps keep feeding smooth across the board.
Is this a threaded barrel for a compensator or suppressor?
No, this is the non-threaded flush-and-crown version. It sits flush with the end of the slide to keep the Hellcat compact. If you want to run a comp or suppressor, you'd want Zaffiri's threaded Hellcat barrel instead.



Reviews
There are no reviews yet.