Description
This is Zaffiri Precision's threaded barrel built specifically for the Gen 5 Glock 17, and it's one of the cleaner ways to open up your pistol for a suppressor or compensator. It runs a 4.97" length in 9mm with a 1/2×28 threaded muzzle and comes with a thread protector so the exposed threads stay clean when you're running bare. Machined from 416R stainless steel and finished in black nitride, it swaps in as a straight drop-in with no gunsmithing and no fuss.
Where the Zaffiri G17 Gen 5 Threaded Barrel Earns Its Keep
The accuracy story here comes down to the fit. Zaffiri machines an oversized lock-up area so the barrel seats tight and repeatable against the slide, which is what tightens your groups shot after shot. The barrel is stress relieved and heat treated to a Rockwell hardness of RC 40-42, and the target crown and polished feed ramp round out a package that feeds and shoots consistently. Folks who've swapped one in report noticeably tighter groupings over the stock barrel and reliable cycling across 115gr, 124gr, and 147gr subsonic loads.
Getting the Most From This Threaded Barrel
The 1/2×28 thread pitch is the standard for 9mm cans and muzzle devices, so it plays nice with the gear you probably already own or plan to buy. The conventional rifling means you're not locked out of lead or plated ammo the way you'd be with a polygonal factory tube, so range days stay affordable. Made in-house in Largo, Florida, it also pairs up with Zaffiri's own slide models like the ZPS.2, ZPS.3, Z Series, and IBS if you're building out a full custom upper.
One thing worth flagging: this is the newer Gen 5 lug pattern, so it fits Gen 5 Glock 17 slides only and will not work with Gen 1 through 4. Match it to the right generation and you've got a barrel that looks as sharp through slide windows as it shoots.
Key Specifications
- Manufacturer: Zaffiri Precision
- Manufacturer Part Number: BA-G17G5-TH-BN
- UPC: 810220063781
- Fit: Glock 17 Gen 5 (newer style lug, Gen 5 only)
- Caliber: 9mm
- Barrel Length: 4.97"
- Twist Rate: 1:10
- Muzzle Thread: 1/2×28 TPI
- Material: 416R Stainless Steel
- Finish: Black Nitride
- Hardness: RC 40-42, stress relieved and heat treated
- Rifling: Conventional (lead, plated, and jacketed compatible)
- Installation: Drop-in, no gunsmithing
- Country of Origin: Made in USA (Largo, Florida)
- Product Type: Pistol Barrel
What’s Included
- Zaffiri Precision Glock 17 Gen 5 threaded barrel
- Thread protector
Frequently Asked Questions
Will this Zaffiri threaded barrel fit any Glock 17?
No, this one is cut for the Gen 5 Glock 17 only. It uses the newer style lug pattern, so it won't drop into a Gen 1 through 4 slide. Make sure your pistol is a Gen 5 G17 before ordering.
Do I need a gunsmith to install the Zaffiri G17 Gen 5 barrel?
Not at all. It's a true drop-in replacement, so you just field strip the pistol, swap the factory barrel for this one, and reassemble. No fitting or gunsmithing required.
What threads does the muzzle have and does it come with a thread protector?
The muzzle is threaded 1/2×28, which is the standard pitch for 9mm suppressors and muzzle devices. A thread protector is included so the threads stay covered when you're running the barrel bare.
Can I shoot lead or reloaded ammo through this barrel?
Yes. It uses conventional rifling rather than the polygonal rifling found in factory Glock barrels, so it handles lead, plated, and jacketed ammunition. That makes it a solid pick for high-volume range shooting and reloads.




Reviews
There are no reviews yet.